Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

--- modem:hg8245q2 [2020/04/01 19:51] – criada tripleoxygen
+++ modem:hg8245q2 [2022/11/07 08:31] (atual) – edição externa 127.0.0.1
@@ Linha 2: / Linha 2: @@
 {{description>Informações sobre o Huawei EchoLife HG8245Q2 Oi onu / modem / router / gateway. Teardown, hacking, unlocking (desbloqueio), firmwares, custom images, recuperação, bridge.}}
+Este modelo é fornecido pela Oi Fibra.
 ===== Disclaimer =====
@@ Linha 15: / Linha 17: @@
 ===== Hardware =====
-{{ https://www.tripleoxygen.net/files/devices/. }}
+[[https://www.tripleoxygen.net/files/devices/huawei/hg8245q2/front.jpg |{{ https://www.tripleoxygen.net/files/devices/huawei/hg8245q2/front_small.jpg }}]]
+[[https://www.tripleoxygen.net/files/devices/huawei/hg8245q2/back.jpg |{{ https://www.tripleoxygen.net/files/devices/huawei/hg8245q2/back_small.jpg }}]]
 ^ SoC | HiSilicon SD5116 |
@@ Linha 33: / Linha 37: @@
 <code>
+HuaWei StartCode 2012.02 (V300R017C10 Mar 19 2017 - 08:22:11)
+NAND:  Nand ID: 0xC2 0xF1 0x80 0x95 0x02 0x00 0x00 0x00
+ECC Match pagesize:2K, oobzie:64, ecctype:4bit
+Nand(Hardware): 128 MiB
+startcode select the uboot to load
+the high RAM is :8080103c
+startcode uboot boot count:-65537
+use the main slave_param area from flash, the RAM data is not OK!!!
+Use the UbootA to load first
+Use the UbootA to load success
+U-Boot 2010.03 (V300R018C10 Jan 11 2019 - 16:06:43)
+Mbist flag = 0x0, ddr totoal size = 0x10000000
+DRAM:  256 MB
+Boot From NAND flash
+Chip Type is SD5116T
+NAND:  Special Nand id table Version 1.23
+Nand ID: 0xC2 0xF1 0x80 0x95 0x02 0x00 0x00 0x00
+ECC Match pagesize:2K, oobzie:64, ecctype:4bit
+Nand(Hardware): Block:128KB Page:2KB Chip:128MB*1 OOB:64B ECC:4bit
+MiB
+Using default environment
+In:    serial
+Out:   serial
+Err:   serial
+PHY power down !!!
+[main.c__6093]::CRC:0x3d80a8b4, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:0, CommitedArea:0x0, Active:0x0, RunFlag:0x0
+Start from main system(0x0)!
+CRC:0x3d80a8b4, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
+x000000100000-0x000008000000 : "mtd=1"
+attaching mtd1 to ubi0
+Main area (A) is OK!
+CRC:0x93e83925, Magic1:0x5a5a5a5a, Magic2:0xa5a5a5a5, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
+doublecore not found!
+Unmounting UBIFS volume file_system!
+Unmount ubifs success!
+UBI start Addr:0x100000!
+Bootcmd:ubi read 0x80907f6c kernelA 0x1b83bc; bootm 0x80907fc0
+BootArgs:noalign mem=247M console=ttyAMA1,115200 ubi.mtd=1 root=/dev/mtdblock11 rootfstype=squashfs mtdparts=hinand:0x100000(startcode),0x7f00000(ubifs),-(reserved) pcie0_sel=x1 maxcpus=2 l2_cache=l2x0 coherent_pool=4M user_debug=0x1f panic=1 skb_priv=128 debug_ll=on
+U-boot Start from NORMAL Mode!
+## Booting kernel from Legacy Image at 80907fc0 ...
+   Image Name:   Linux-3.10.53-HULK2
+   Image Type:   ARM Linux Kernel Image (uncompressed)
+   Data Size:    1803048 Bytes =  1.7 MB
+   Load Address: 80e08000
+   Entry Point:  80e08000
+Match the dtb file index : 3!
+   Memory Start: 80900000
+   Loading Kernel Image ... OK
+OK
+   kernel loaded at 0x80908000, end = 0x80abdffa
+Starting kernel ...
+Uart base = 0x1010F000
+dtb addr = 0x80F58008
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
+Initializing cgroup subsys cpuset
+Initializing cgroup subsys cpu
+Initializing cgroup subsys cpuacct
+Linux version 3.10.53-HULK2 (ci@SZX1000044441) (gcc version 4.7.1 (SDK V100R005C00SPC030B050) ) #1 SMP Fri Oct 20 01:08:58 CST 2017
+CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=18c53c7d
+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+Machine: Hisilicon A9, model: HISI-CA9
+skbuff priv len is 128.
+Memory policy: ECC disabled, Data cache writealloc
+On node 0 totalpages: 63232
+free_area_init_node: node 0, pgdat c049e440, node_mem_map c065b800
+  Normal zone: 618 pages used for memmap
+  Normal zone: 0 pages reserved
+  Normal zone: 63232 pages, LIFO batch:15
+[dts]:cpu type is 5115
+PERCPU: Embedded 7 pages/cpu @c08ca000 s7424 r8192 d13056 u32768
+pcpu-alloc: s7424 r8192 d13056 u32768 alloc=8*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62614
+Kernel command line: noalign mem=247M console=ttyAMA1,115200 ubi.mtd=1 root=/dev/mtdblock11 rootfstype=squashfs mtdparts=hinand:0x100000(startcode),0x7f00000(ubifs),-(reserved) pcie0_sel=x1 maxcpus=2 l2_cache=l2x0 coherent_pool=4M user_debug=0x1f panic=1 skb_priv=128 debug_ll=on
+PID hash table entries: 1024 (order: 0, 4096 bytes)
+Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
+Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
+allocated 505856 bytes of page_cgroup
+please try 'cgroup_disable=memory' option if you don't want memory cgroups
+Memory: 247MB = 247MB total
+Memory: 244672k/244672k available, 8256k reserved, 0K highmem
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffe00000 - 0xfffe0000   (1920 kB)
+    vmalloc : 0xcf800000 - 0xff000000   ( 760 MB)
+    lowmem  : 0xc0000000 - 0xcf700000   ( 247 MB)
+    modules : 0xbf000000 - 0xc0000000   (  16 MB)
+      .text : 0xc0008000 - 0xc042edf4   (4252 kB)
+      .init : 0xc042f000 - 0xc045bd00   ( 180 kB)
+      .data : 0xc045c000 - 0xc04a23d0   ( 281 kB)
+       .bss : 0xc04a23d0 - 0xc04caf48   ( 163 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+NR_IRQS:512
+sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
+[DTS][LED]-->WARN:Cannot find led info in dtb,make sure there is no led on board
+Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Mount-cache hash table entries: 512
+Initializing cgroup subsys memory
+Initializing cgroup subsys devices
+Initializing cgroup subsys freezer
+Initializing cgroup subsys blkio
+CPU: Testing write buffer coherency: ok
+Setting up static identity map for 0xc0313d20 - 0xc0313d54
+SD511x chip id:0x51162100
+sd511x_core_reset cpu : 1  mask=200
+CPU1: Booted secondary processor
+Brought up 2 CPUs
+SMP: Total of 2 processors activated (3188.32 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+NET: Registered protocol family 16
+DMA: preallocated 4096 KiB pool for atomic coherent allocations
+L310 cache controller enabled
+l2x0: 16 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x02450001, Cache size: 524288 B
+bio: create slab <bio-0> at 0
+Switching to clocksource arm,sp804
+cfg80211: Calling CRDA to update world regulatory domain
+NET: Registered protocol family 2
+TCP established hash table entries: 2048 (order: 2, 16384 bytes)
+TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
+TCP: Hash tables configured (established 2048 bind 2048)
+TCP: reno registered
+UDP hash table entries: 256 (order: 1, 12288 bytes)
+UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
+NET: Registered protocol family 1
+PCI: CLS 0 bytes, default 64
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+jffs2: version 2.2. Â© 2001-2006 Red Hat, Inc.
+fuse init (API version 7.22)
+msgmni has been set to 477
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+brd: module loaded
+mtdoops: mtd device (mtddev=name/number) must be supplied
+Spi id table Version 1.22
+Special nand id table Version 1.33
+Hisilicon Nand Flash Controller V301 Device Driver, Version 1.10
+Nand ID: 0xC2 0xF1 0x80 0x95 0x02 0x00 0x00 0x00
+Nand(Hardware): Block:128KB Page:2KB Chip:128MB OOB:64B ECC:4bit
+NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Macronix MX30LF1G18AC), 128MiB, page size: 2048, OOB size: 64
+NAND_ECC_NONE selected by board driver. This is not recommended!
+cmdlinepart partitions found on MTD device hinand
+Creating 3 MTD partitions on "hinand":
+x000000000000-0x000000100000 : "startcode"
+x000000100000-0x000008000000 : "ubifs"
+x000008000000-0x000008000000 : "reserved"
+mtd: partition "reserved" is out of reach -- disabled
+softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
+TCP: cubic registered
+NET: Registered protocol family 17
+ThumbEE CPU extension supported.
+mapp kbox ddrram_address=0, 			ddrram_size=0 fail[WARNNING]:Kbox device descriptor struct kbox_dev_des 		Intialization Failed
+kbox: init ddrram fail ret=-99
+kbox: load OK
+UBI: attaching mtd1 to ubi0
+UBI: scanning is finished
+UBI: attached mtd1 (name "ubifs", size 127 MiB) to ubi0
+UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
+UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
+UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
+UBI: good PEBs: 1016, bad PEBs: 0, corrupted PEBs: 0
+UBI: user volume: 14, internal volumes: 1, max. volumes count: 128
+UBI: max/mean erase counter: 9/3, WL threshold: 512, image sequence number: 971853262
+UBI: available PEBs: 288, total reserved PEBs: 728, PEBs reserved for bad PEB handling: 20
+UBI: background thread "ubi_bgt0d" started, PID 255
+Warning: unable to open an initial console.
+squashfs_cache_init: sqcachesize=8.
+VFS: Mounted root (squashfs filesystem) readonly on device 31:11.
+Freeing unused kernel memory: 176K (c042f000 - c045b000)
+******** Total Boot time: 1120 ms, uncompress initrd cost 0 ms ********
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+e000.uart: ttyAMA0 at MMIO 0x1010e000 (irq = 77) is a 16550A
 </code>