O3 Labs

Ferramentas do usuário

Ferramentas do site

Visitou:
ont:furukawa:ld420-10r

Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

Link para esta página de comparações

Próxima revisão		Revisão anterior
ont:furukawa:ld420-10r [2025/01/08 06:59] – criada tripleoxygenont:furukawa:ld420-10r [2025/01/08 14:25] (atual) – [Stock] tripleoxygen
Linha 11: Linha 11:
 ===== Hardware ===== ===== Hardware =====
  
 +{{:ont:furukawa:furukawa-ld420-10r-front.jpg?direct&400 |}}
 +{{ :ont:furukawa:furukawa-ld420-10r-back.jpg?direct&400|}}
 +
 +----
 +
 +^ SoC | Ralink MT751020 XPON SoC - MIPS 34Kc @ 650 MHz |
 +^ RAM | 128 MB - Nanya NT5TU64M16HG-AC |
 +^ Flash | 16 MB - Macronix MX25L12805D |
 +^ LAN | 1 Gbit/s |
 +^ USB | - |
 +^ Wireless 2.4 GHz| - |
 +^ Wireless 5 GHz| - |
 +^ Laser Driver/Transceiver | UX3328S |
 +^ Acoplamento fibra | SC/APC |
 +^ FXS | - |
 +^ HPNA | - |
 +^ Serial | Sim |
 +^ JTAG | - |
 +^ Alimentação | DC 12 V / 1500 mA |
 +^ Credenciais padrão (Web) 1 | admin / fkw123 |
 +^ Credenciais padrão (Web) 2 | support / fkw@123 |
 +^ Credenciais padrão (telnet) | fioadm / dp2a3r2mhb |
 +^ Credenciais padrão (gponshell) | admin / admin |
 +^ Credenciais padrão (UART) | admin / admin |
 +^ IP LAN padrão | 192.168.1.1/24 ou 192.168.2.1/24 |
 +^ Porta Web | 8080 |
 +^ Link | [[https://anon.to/?https://www.furukawalatam.com/pt-br/catalogo-de-produtos-detalhes/modem-optico-ont-gpon-ld42010r|Furukawa MODEM OPTICO ONT GPON LD420-10R]] |
  
 ==== GPON ==== ==== GPON ====
Linha 19: Linha 46:
 ^ Equipment ID | LD420-10R | ^ Equipment ID | LD420-10R |
 ^ OMCC Version | 160 (0xA0) | ^ OMCC Version | 160 (0xA0) |
-^ Software Version (Main, example) | V1.3.0 | +^ Software Version (Main, example) | V1.5.0 | 
-^ Software Version (Standby, example) | V1.1 |+^ Software Version (Standby, example) | V1.3.0 |
  
 ===== Bootlog ===== ===== Bootlog =====
Linha 27: Linha 54:
  
 <code> <code>
 +DRAMC V2.2.0.2 (0)
  
 +
 +MT751020Memory size 128MB
 +
 +flash base: bc000000
 +Found SPI Flash 16MiB MX25L12805D at 0xbc000000
 +
 +tcPhyVer_mt7510FE 
 + Not found TC Phy
 +mtPhyVer_7510Ge 
 +Not found TC Phy
 +####(Build info : shidong@TWSH-EoC 19:16:53 Thu Jul 21 2016 e0f779fb)
 +*** Press Ctrl + C key to stop autorun(3 seconds) ***
 +............................................................
 +Checking ImageA...
 +ImageA check OK, fs_offse:1703936, kernel_size:1471567
 +==>Boot system from [ImageA]...
 +Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80780000
 +Uncompressing [LZMA] ...  done.
 +blParms: ACTIVE=A softMode=NORMAL mtdparts=tc3162:393216@0(Boot),131072@393216(Env),7733248@524288(ImageA),7733248@8257536(ImageB),524288@15990784(Config),131072@16515072(Plugin),131072@16646144(SECTION_EGIS),5888k@2176k(rootfs)
 +Linux version 2.6.36 (liuzhe@dev8.sh.gj.com) (gcc version 4.3.4 (GCC) ) #1 SMP Thu Aug 15 10:28:51 CST 2019
 +ISPRAM0: PA=00350000,Size=00008000,enabled
 +DSPRAM0: PA=1dff8000,Size=00001000,enabled
 +flash_init: flash_base:bc000000 
 +flash_init: flash_base:bc000000 
 +memsize:128MB
 +Ralink MT751020 SOC prom init
 +InfoInfo:retrieve_boot_loader_parameters():arcs_cmdline: es=1 ACTIVE=A softMode=NORMAL mtdparts=tc3162:393216@0(Boot),131072@393216(Env),7733248@524288(ImageA),7733248@8257536(ImageB),524288@15990784(Config),131072@16515072(Plugin),131072@16646144(SECTION_EGIS),5888k@2176k(rootfs)
 +bootconsole [early0] enabled
 +CPU revision is: 00019555 (MIPS 34Kc)
 +Determined physical RAM map:
 + memory: 07fe0000 @ 00020000 (usable)
 +Wasting 1024 bytes for tracking 32 unused pages
 +Zone PFN ranges:
 +  Normal   0x00000020 -> 0x00008000
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000020 -> 0x00008000
 +3 available secondary CPU TC(s)
 +PERCPU: Embedded 7 pages/cpu @81103000 s7232 r8192 d13248 u65536
 +pcpu-alloc: s7232 r8192 d13248 u65536 alloc=16*4096
 +pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32480
 +Kernel command line:  es=1 ACTIVE=A softMode=NORMAL mtdparts=tc3162:393216@0(Boot),131072@393216(Env),7733248@524288(ImageA),7733248@8257536(ImageB),524288@15990784(Config),131072@16515072(Plugin),131072@16646144(SECTION_EGIS),5888k@2176k(rootfs) root=/dev/mtdblock7 rootfstype=squashfs ro  
 +PID hash table entries: 512 (order: -1, 2048 bytes)
 +Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
 +Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
 +Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
 +Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 32 bytes
 +Writing ErrCtl register=0004410b
 +Readback ErrCtl register=0004410b
 +nmi base is 8115c200
 +Memory: 125200k/130944k available (3420k kernel code, 5744k reserved, 690k data, 216k init, 0k highmem)
 +SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 +Hierarchical RCU implementation.
 + Verbose stalled-CPUs detection is disabled.
 +NR_IRQS:64
 +CPU frequency 648.00 MHz
 + Using 266.667 MHz high precision timer.
 +console [ttyS0] enabled, bootconsole disabled
 +console [ttyS0] enabled, bootconsole disabled
 +Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
 +pid_max: default: 32768 minimum: 301
 +Mount-cache hash table entries: 512
 +34K sync es set to 1.
 +Config7: 0x80080500
 +Limit of 4 TCs set
 +TLB of 64 entry pairs shared by 2 VPEs
 +VPE 0: TC 0 1 2, VPE 1: TC 3
 +IPI buffer pool of 16 buffers
 +CPU revision is: 00019555 ((null))
 +TC 1 going on-line as CPU 1
 +CPU revision is: 00019555 ((null))
 +TC 2 going on-line as CPU 2
 +CPU revision is: 00019555 ((null))
 +TC 3 going on-line as CPU 3
 +Brought up 4 CPUs
 +kworker/u:0 used greatest stack depth: 14888 bytes left
 +NET: Registered protocol family 16
 +MT7510_pcie_init
 +check pcie link up status: 
 +isRC0_LINKUP=0 
 +isRC1_LINKUP=0 
 +PCI-E RC0 & RC1 can not link up
 +bio: create slab <bio-0> at 0
 +NET: Registered protocol family 8
 +NET: Registered protocol family 20
 +Switching to clocksource MIPS
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 4096 (order: 3, 32768 bytes)
 +TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
 +TCP: Hash tables configured (established 4096 bind 4096)
 +TCP reno registered
 +UDP hash table entries: 128 (order: 0, 4096 bytes)
 +UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
 +NET: Registered protocol family 1
 +TC3162 hardware watchdog module loaded.
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +JFFS2 version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
 +msgmni has been set to 244
 +io scheduler noop registered (default)
 +pci_hotplug: PCI Hot Plug PCI Core version: 0.5
 +shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
 +ttyS0 at I/O 0xbfbf0003 (irq = 1) is a TC3162
 +brd: module loaded
 +loop: module loaded
 +tc3162 mtd init: mt6573_nand_init enter
 +MediaTek MT6573 Nand driver init, version v2.0
 +-------------->kernel init tc3162_mtd_init
 +blParms :ACTIVE=A softMode=NORMAL mtdparts=tc3162:393216@0(Boot),131072@393216(Env),7733248@524288(ImageA),7733248@8257536(ImageB),524288@15990784(Config),131072@16515072(Plugin),131072@16646144(SECTION_EGIS),5888k@2176k(rootfs)
 +[Jason debug]tc3162: flash device 0x01000000 at 0x1c000000
 +tc3162: Found SPIFLASH 16MiB MX25L12805D
 +8 cmdlinepart partitions found on MTD device tc3162
 +[w]part_nu = 8 
 +Creating 8 MTD partitions on "tc3162":
 +0x000000000000-0x000000060000 : "Boot"
 +0x000000060000-0x000000080000 : "Env"
 +0x000000080000-0x0000007e0000 : "ImageA"
 +0x0000007e0000-0x000000f40000 : "ImageB"
 +0x000000f40000-0x000000fc0000 : "Config"
 +0x000000fc0000-0x000000fe0000 : "Plugin"
 +0x000000fe0000-0x000001000000 : "SECTION_EGIS"
 +0x000000220000-0x0000007e0000 : "rootfs"
 +Allocate 16 byte aligned buffer_r: a04513a0
 +Allocate 16 byte aligned buffer_w: a04523c0
 +Enable NFI Clock
 +# MT6573 NAND # : Use HW ECC
 +manu_id=40, dev_id=40
 +ext_id=404040,
 +Device not found, ID: 4040
 +Not Support this Device! 
 +[NAND] pagesz:2048 eccsz: 32, oobsz: 128
 +Support this Device in MTK table! 4040 
 +No NAND device found.
 +# MT6573 NAND # : nand_scan fail.
 +[NFI] mt6573_nand_probe fail, err = -6!
 +PPP generic driver version 2.4.2
 +PPP Deflate Compression module registered
 +PPP BSD Compression module registered
 +NET: Registered protocol family 24
 +RT3xxx EHCI/OHCI init.
 + wmonitor_init entered.
 +GACT probability NOT on
 +Mirror/redirect action on
 +u32 classifier
 +    input device check on
 +    Actions configured
 +Netfilter messages via NETLINK v0.30.
 +nf_conntrack version 0.5.0 (1956 buckets, 7824 max)
 +ctnetlink v0.93: registering with nfnetlink.
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +arp_tables: (C) 2002 David S. Miller
 +TCP cubic registered
 +NET: Registered protocol family 10
 +IPv6 over IPv4 tunneling driver
 +NET: Registered protocol family 17
 +Initializing MCPD Module
 +Initializing MTK Multicast API Module
 +tw_mcast_chrdev_init()
 +Ebtables v2.0 registered
 +ebt_ipv6cp_reject_opt registered
 +ebt_skb_grab_init registered successfully.
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 +All bugs added by David S. Miller <davem@redhat.com>
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
 +Freeing unused kernel memory: 216k freed
 +busybox init and set aff
 +init started: BusyBox v1.15.3 (2016-08-10 10:40:08 CST)
 +mount used greatest stack depth: 14280 bytes left
 +mount Config partition OK
 +yaffs: dev is 32505861 name is "mtdblock5" rw
 +yaffs: passed flags ""
 +mount used greatest stack depth: 14192 bytes left
 +/etc/init.d/S01mountconfig: line 36: /usr/S304/bin/flayaffs: dev is 32505861 name is "mtdblock5" rw
 +yaffs: passed flags ""
 +sh_eraseall: not found
 +sh: 30: unknown operand
 +plugin data partition used % 
 +cp: cannot staS01mountconfig used greatest stack depth: 14144 bytes left
 +t '/bin/ctadmin': No such file or directory
 +ctadmin file load error!!!!!!!!!
 +mkdir: cannot create directory '/usr/plugin/coredump': Read-only file system
 +loading modules ...
 +A
 +Brmgr device initialization done
 +module_sel: module license 'unspecified' taints kernel.
 +Disabling lock debugging due to kernel taint
 +insmod used greatest stack depth: 14096 bytes left
 +button.ko inquery mode 
 +TC3162 LED Manager 0.1 init
 +
 +tcledctrl version: tcledctrl V1.1.0.0 (Aug 15 2019-10:29:12).
 +insmod used greatest stack depth: 14008 bytes left
 +tccicmd V1.1.0.0 (Aug 15 2019-10:29:14)
 +ERROR!Create /etc/fwTCver.conf fail!
 +
 +SIFMaster 0.1 init
 +
 +Register sifm cmd
 +femac.c:v1.00-NAPI 29.Mar.2011
 +eth0: FE MAC Ethernet address: 00:AA:BB:01:23:45
 +hwdb init OK!
 +xPON driver initialization
 +Alloc data struct memory successful, 39292
 +EN7570 not found!
 +vendor id : T&W
 +vendor pn : TW2362G-CDEH
 +Match Vendor
 +PON PHY driver version is 151014.102.108
 +epon_chrdev_init()
 +SN[FRKWxxxxxxxx]
 +PWD[]
 +insmod used greatest stack depth: 13948 bytes left
 +XPON Mapping Module init OK!
 +
 +soft_ratelimit_init
 +tardev register successful!
 +pondata.cfg
 +Info:Init egis data successfully
 +Initializing random number generator... read-only file system detected...done
 +Config network...
 +eth0: starting interface.
 +EPhy debug(8): tcPhyVerLookUp() in  
 +MT7510FE, EPhy debug(8)(15): tcPhyVerLookUp() out  
 +PhyPart debug: tcPhyInit() in , tcphyver=15, phyaddr=8, eco=0x0 
 +phyaddr = 8 
 +PhyPart debug: tcPhyInit() out , r31=0xb000 
 +EPhy debug(12): tcPhyVerLookUp() in  
 +MT7510Ge,Internal check flag: fgMT7510Ge_INT=0x0, eco=0x50003 
 +EPhy debug(12)(16): tcPhyVerLookUp() out  
 +PhyPart debug: tcPhyInit() in , tcphyver=16, phyaddr=12, eco=0x0 
 +
 + 7510Ge, phyaddr= (12,12) 
 +debug... ,phyaddr=12 ,eco=0x50003 
 +PhyPart debug: tcPhyInit() out , r31=0xb000 
 +Open /dev/hwnat0 pseudo device failed
 +mkdir: cannot create directory '/dev/pts': File exists
 +mknod: /dev/ptmx: File exists
 +mknod: /dev/urandom: File exists
 +mknod: /dev/hwdb: File exists
 +Ralink HW NAT Module Enabled
 +IP check use Black List
 +sf_LoadConfig: Load config from file /usr/S304/etc/oversea/FIO-gpon-1f0/soft_feature.cfg.new
 +sf_LoadConfig: Load config from file /usr/S304/etc/oversea/FIO-gpon-1f0/soft_feature.cfg
 +SF_SetFeatureStr: Set feature(location) to tw
 +SF_SetFeatureStr: Set feature(customer) to fio
 +SF_SetFeatureStr: Set feature(olt) to tw
 +SF_SetFeatureStr: Set feature(olt_version) to 0
 +SF_SetFeatureStr: Set feature(onu_type) to hgu
 +SF_SetFeatureStr: Set feature(language) to english
 +SF_SetFeatureStr: Set feature(isp) to ct
 +SF_SetFeatureStr: Set feature(web_style) to global
 +SF_SetFeature: Set feature(pon_slot) to 0
 +SF_SetFeature: Set feature(fe_slot) to 1
 +SF_SetFeature: Set feature(ge_slot) to 1
 +SF_SetFeature: Set feature(pots_slot) to 2
 +SF_SetFeature: Set feature(veip_slot) to 5
 +SF_SetFeature: Set feature(video_slot) to 3
 +SF_SetFeature: Set feature(iphost_slot) to 0
 +SF_SetFeatureStr: Set feature(qospolicy) to sp
 +SF_SetFeatureStr: Set feature(trunk_emac) to disable
 +SF_SetFeatureStr: Set feature(entity_port) to enable
 +SF_SetFeatureStr: Set feature(ignore_evtocd) to disable
 +SF_SetFeatureStr: Set feature(uplink_type) to gpon
 +SF_SetFeatureStr: Set feature(support_ipv6) to true
 +SF_SetFeatureStr: Set feature(support_sntp) to true
 +SF_SetFeatureStr: Set feature(support_syslog) to true
 +SF_SetFeatureStr: Set feature(support_ddns) to true
 +SF_SetFeatureStr: Set feature(support_portmapping) to true
 +SF_SetFeatureStr: Set feature(support_ftpd) to true
 +SF_SetFeatureStr: Set feature(support_telnetd) to true
 +SF_SetFeatureStr: Set feature(support_sshd) to true
 +SF_SetFeatureStr: Set feature(support_route) to true
 +SF_SetFeatureStr: Set feature(support_mcast) to true
 +SF_SetFeatureStr: Set feature(support_mcast_mld) to true
 +SF_SetFeatureStr: Set feature(support_qos) to true
 +SF_SetFeatureStr: Set feature(support_qos_ct) to true
 +SF_SetFeatureStr: Set feature(support_dnsproxy) to true
 +SF_SetFeatureStr: Set feature(support_dnsproxy_ct) to true
 +SF_SetFeatureStr: Set feature(support_ipping) to true
 +SF_SetFeatureStr: Set feature(support_ctping) to true
 +SF_SetFeatureStr: Set feature(support_alg) to true
 +SF_SetFeatureStr: Set feature(support_alg_ipsec) to true
 +SF_SetFeatureStr: Set feature(support_alg_pptp) to true
 +SF_SetFeatureStr: Set feature(support_alg_siproxd) to true
 +SF_SetFeatureStr: Set feature(support_alg_irc) to true
 +SF_SetFeatureStr: Set feature(support_firewall) to true
 +SF_SetFeatureStr: Set feature(support_srvcontrol) to true
 +SF_SetFeatureStr: Set feature(support_servicemanage) to true
 +SF_SetFeatureStr: Set feature(support_macfilter) to true
 +SF_SetFeatureStr: Set feature(support_ipfilter) to true
 +SF_SetFeatureStr: Set feature(support_urlfilter) to true
 +SF_SetFeatureStr: Set feature(support_antiattack) to true
 +SF_SetFeatureStr: Set feature(support_tr69c) to true
 +SF_SetFeatureStr: Set feature(support_tr69c_remotestatus) to true
 +SF_SetFeatureStr: Set feature(support_tr69c_maintain) to true
 +SF_SetFeatureStr: Set feature(support_tr69c_monitor) to true
 +SF_SetFeatureStr: Set feature(support_tr69c_alarm) to true
 +SF_SetFeatureStr: Set feature(support_tr69c_ssl) to true
 +SF_SetFeatureStr: Set feature(support_tr69c_original_openssl) to true
 +SF_SetFeatureStr: Set feature(support_upnp) to true
 +SF_SetFeatureStr: Set feature(support_upnp_ct) to true
 +SF_SetFeatureStr: Set feature(support_upnp_dmcp) to true
 +SF_SetFeatureStr: Set feature(support_upnp_igd) to true
 +SF_SetFeatureStr: Set feature(support_ct) to true
 +SF_SetFeatureStr: Set feature(support_ct_ehomeclient) to true
 +SF_SetFeatureStr: Set feature(support_ct_resettodefault) to true
 +SF_SetFeatureStr: Set feature(support_ct_portalmanagement) to true
 +SF_SetFeatureStr: Set feature(support_ct_userinfo) to true
 +SF_SetFeatureStr: Set feature(support_ct_telecomaccount) to true
 +SF_SetFeatureStr: Set feature(support_ct_usermanagement) to true
 +SF_SetFeatureStr: Set feature(support_ct_autorun) to true
 +SF_SetFeatureStr: Set feature(support_ct_reconnect) to true
 +SF_SetFeatureStr: Set feature(support_ct_loopdetect) to true
 +SF_SetFeatureStr: Set feature(support_httpd) to true
 +SF_SetFeatureStr: Set feature(support_httpd_usermanagement) to true
 +SF_SetFeatureStr: Set feature(support_httpd_cert) to true
 +SF_SetFeatureStr: Set feature(support_httpd_tod) to true
 +SF_SetFeatureStr: Set feature(support_httpd_multiuser) to true
 +SF_SetFeatureStr: Set feature(support_config_backup) to true
 +SF_SetFeatureStr: Set feature(support_dlna) to true
 +SF_SetFeatureStr: Set feature(support_dhcp) to true
 +SF_SetFeatureStr: Set feature(support_dhcp_relay) to true
 +SF_SetFeatureStr: Set feature(support_dhcpc_option60) to true
 +SF_SetFeatureStr: Set feature(support_dhcpc_option33) to true
 +SF_SetFeatureStr: Set feature(support_dhcpc_option42) to true
 +SF_SetFeatureStr: Set feature(support_dhcpc_option43) to true
 +SF_SetFeatureStr: Set feature(support_dhcpc_option249) to true
 +SF_SetFeatureStr: Set feature(support_rtp_rox) to true
 +SF_SetFeatureStr: Set feature(support_rtp_zebra) to true
 +SF_SetFeatureStr: Set feature(support_pppbridge) to true
 +SF_SetFeatureStr: Set feature(support_autodetection) to true
 +SF_SetFeatureStr: Set feature(support_security) to true
 +SF_SetFeatureStr: Set feature(support_iphost) to true
 +SF_SetFeature: Set feature(wan_inet_bridge_def_mtu) to 1500
 +SF_SetFeature: Set feature(wan_other_bridge_def_mtu) to 1500
 +SF_SetFeature: Set feature(wan_ip_route_def_mtu) to 1492
 +SF_SetFeature: Set feature(wan_ppp_route_def_mtu) to 1400
 +SF_SetFeatureStr: Set feature(data_model) to oversea
 +SF_SetFeatureStr: Set feature(support_omci_config_wan) to true
 +SF_SetFeatureStr: Set feature(support_skip_login_shell) to true
 +SF_SetFeatureStr: Set feature(support_omci_sfu_mode) to true
 +SF_SetFeatureStr: Set feature(sf_cfg_name) to oversea/FIO-gpon-1f0
 +Set Pon phy Mode into GPON.
 +Board not support WLAN.
 +TC3162 hardware watchdog initialized
 +Disable GPON ONU
 +set sn FRKWxxxxxxxx passwd 
 +CMD Failed: input arguments failed.
 +CMD: cm_tests_sanity_0_allowed
 +Customer Name: fio
 +Starting ssp
 +Starting cli
 +Starting timer
 +Starting Bsp
 +open(): No such file or directory
 +CMD: cm_tests_sanity_0_allowed
 +Starting hal
 +gponhal:error:19.484:oalVosMsg_initByName:102:connect to /var/smd_messaging_server_addr failed, rc=-1 errno=2
 +vosMsg_init: EID_GPONHAL error = 9002, wait ...
 +CMD: cm_tests_sanity_0_allowed
 +T&W: cm test ask failed! Start up TW ONU Software now!
 +ONU start up now
 +smd:error:21.898:oalFil_makeDir:276:mkdir on /usr/plugin/cpk failed
 +smd:error:21.898:oalFil_makeDir:276:mkdir on /usr/plugin/cpk/lib failed
 +smd:error:21.898:oalFil_makeDir:276:mkdir on /usr/plugin/.upgradePlugins failed
 +smd:error:21.899:oalFil_copyToBuffer:65:could not open file /usr/plugin/cpk/.config.json, errno=2
 +SMD_cpmParseDbInfo: Fail to open db info!
 +Launch app cmc
 +Launch app hal
 +hal:error:22.143:UTIL_pluginGetName:194:Enter--
 +hal:error:22.143:UTIL_pluginGetName:201:Not null--
 +HAL_ponInit  111 
 +HAL_ponInit enter pon init  
 +hal:error:22.258:HAL_wlanGetFds:4236:========================ffffffff creat soket (6) success============================
 +
 +Starting counter
 +cmc:error:23.260:UTIL_pluginGetName:194:Enter--
 +cmc:error:23.260:UTIL_pluginGetName:201:Not null--
 +Starting omci
 +SF_SetFeature: Set feature(olt) to 3
 +Starting omciagt
 +iptables used greatest stack depth: 13824 bytes left
 +Starting net
 +Starting ssp_deamon
 +SF_SetFeature: Set feature(olt) to 3
 +Hal is ready.
 +SF_SetFeature: Set feature(olt) to 2
 +PON_MgpGponPriv->gponCfg.sshmac = 02:4c:11:xx:xx:xx.
 +SG_CFG_PON: slot:0, portId=0, SN=FRKWXXXXXXXX, passwd=00000000000000000000, sfThr=0, sdThr=0
 +Link State: LAN_0 up.
 +iptables: No chain/target/match by that name.
 +iptables: No chain/target/match by that name.
 +iptables: No chain/target/match by that name.
 +ip6_tables: (C) 2000-2006 Netfilter Core Team
 +ip6tables used greatest stack depth: 13752 bytes left
 +cmc:error:26.751:hal_insertModulesWithDep:312:insmod nf_defrag_ipv6.ko FAILED in hal_insertModule() ret=9003.
 +iptables: Chain already exists.
 +iptables: Chain already exists.
 +ip6tables: No chain/target/match by that name.
 +ip6tables v1.4.10: Couldn't find target `fwd_host_detect'
 +
 +Try `ip6tables -h' or 'ip6tables --help' for more information.
 +ip6tables: No chain/target/match by that name.
 +Chain 'in_mac_filter' doesn't exist.
 +Chain 'in_wan_conn' doesn't exist.
 +Chain 'fwd_mac_filter' doesn't exist.
 +Chain 'fwd_wan_conn' doesn't exist.
 +Chain 'out_wan_conn' doesn't exist.
 +Chain 'out_mac_filter' doesn't exist.
 +Chain 'post_wan_conn' doesn't exist.
 +Chain 'in_loid_redirect' doesn't exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Chain 'in_url_ctl' doesn't exist.
 +Sorry, rule does not exist.
 +Chain 'in_internet_ctl' doesn't exist.
 +Sorry, rule does not exist.
 +Chain 'fwd_internet_ctl' doesn't exist.
 +Sorry, rule does not exist.
 +Chain 'in_host_conn' doesn't exist.
 +Sorry, rule does not exist.
 +config soft_qdma flag = 2, ratelimit = 0Mbps
 +mtcphy[4]: Link-down!!!
 +Link State: LAN_0 down.
 +==== emdm init OK ====
 +updata emdm param default value to mdm success!!
 +Cannot open /var/config/importCfgFactoryMode:0, RestoreMode:0
 +read config from CONFIG
 +cmc:error:30.325:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.332:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.333:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.334:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.334:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.341:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.348:mdm_setParamNodeString:2267:validate param error oid=369, param=Protocol, value=None, ret=9007
 +upload config from CONFIG
 +cmc:error:30.461:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.462:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.470:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.470:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.472:mdm_setParamNodeString:2267:validate param error oid=259, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.473:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.473:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.478:mdm_setParamNodeString:2267:validate param error oid=276, param=X_BROADCOM_COM_ConnectionId, value=0, ret=9007
 +cmc:error:30.486:mdm_setParamNodeString:2267:validate param error oid=369, param=Protocol, value=None, ret=9007
 +cmc:error:30.751:mdm_getNextMdmObjPathDesc:100:objNode(314) is NULL
 +cmc:error:30.751:mdm_loadConfig:482:Can't get InternetGatewayDevice.Services.VoiceService.{i}.VoiceProfile.{i} object
 +
 +cmc:error:30.751:mdm_getNextMdmObjPathDesc:100:objNode(226) is NULL
 +Launch app crond
 +Set gateway led status to ONJan  1 00:00:31 crond[1228]: crond (busybox 1.15.3) started, log level 8
 +
 +Stop app crond
 +Launch app crond
 +Jan  1 00:00:31 crond[1235]: crond (busybox 1.15.3) started, log level 8
 +
 +Stop app crond
 +Launch app crond
 +Stop app crond
 +Launch app crond
 +Stop app crond
 +Launch app crond
 +Jan  1 00:00:31 crond[1244]: crond (busybox 1.15.3) started, log level 8
 +
 +Sorry, rule does not exist.
 +Sorry, rule does not exist.
 +Launch app monitorcollector
 +Launch app ipv6mon
 +ipv6mon:error:31.966:UTIL_pluginGetName:194:Enter--
 +ipv6mon:error:31.966:UTIL_pluginGetName:201:Not null--
 +Launch app tr69c
 +monitorcollector:error:31.986:UTIL_pluginGetName:194:Enter--
 +monitorcollector:error:31.986:UTIL_pluginGetName:201:Not null--
 +cmc:error:32.561:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:32.561:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +Launch app dhcpd
 +Link State: LAN_0 up.
 +dhcpd:error:32.827:UTIL_pluginGetName:194:Enter--
 +dhcpd:error:32.828:UTIL_pluginGetName:201:Not null--
 +tr69c:error:33.001:UTIL_pluginGetName:194:Enter--
 +tr69c:error:33.002:UTIL_pluginGetName:201:Not null--
 +Launch app mcpd
 +Config File not exist! Write default.: No such file or directory
 +ip_conntrack_devicectl load 
 +conntrack v1.4.1 (conntrack-tools): connection tracking table has been emptied.
 +dhcpd:error:33.909:read_leases:937:Unable to open /etc/udhcpd.leases for reading
 +ip used greatest stack depth: 13728 bytes left
 +cmc:error:34.439:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:34.440:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +Launch app dhcp6s
 +Launch app radvd
 +tc3262_gmac_close
 +eth0: starting interface.
 +cmc:error:35.194:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:35.195:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +Sorry, rule does not exist.
 +Launch app ssk
 +device eth0 is not a slave of br0
 +ssk:error:36.241:UTIL_pluginGetName:194:Enter--
 +ssk:error:36.241:UTIL_pluginGetName:201:Not null--
 +device eth0 entered promiscuous mode
 +br1: port 1(eth0) entering forwarding state
 +br1: port 1(eth0) entering forwarding state
 +method = HW_NAT_TAB_CLEAN
 +done
 +tc3262_gmac_close
 +br1: port 1(eth0) entering forwarding state
 +eth0: starting interface.
 +br1: port 1(eth0) entering forwarding state
 +br1: port 1(eth0) entering forwarding state
 +ifconfig: SIOCGIFFLAGS: No such device
 +method = HW_NAT_TAB_CLEAN
 +done
 +method = HW_NAT_TAB_CLEAN
 +done
 +method = HW_NAT_TAB_CLEAN
 +done
 +ifconfig: SIOCSIFFLAGS: Cannot assign requested address
 +sh: fc: not found
 +conntrack v1.4.1 (conntrack-tools): connection tracking table has been emptied.
 +Init node exportable
 +cmc_init successful
 +smd:error:40.873:SMD_insertDlsInfoEntry:3602:consoled monitoring fd 0
 +smd:error:40.874:smd_initInetServerSocket:211:bind errno=125 port=30005 fd=21
 +Launch app httpd
 +Launch app dnsproxy
 +Launch app redirect
 +Launch app nfqueued
 +Launch app loopdetect
 +SMD_cpmGetVosEntityInfoByName: Fail to find plugin from hash table!
 +SMD_cpmCpulimitRestartAll: Fail to get cpulimit eInfo!
 +loopdetect:error:41.189:UTIL_pluginGetName:194:Enter--
 +loopdetect:error:41.189:UTIL_pluginGetName:201:Not null--
 +monitor task is initialized pid= 1432 
 +LAN[1] Link UP.
 +error no 9
 +can't send message 
 +: Bad file descriptor
 +tr69c:error:41.423:HAL_flashReadIteam:184:HAL_flashReadIteam() open file [/var/config/item/vendorCfg] fail 
 +
 +...in_dev_name:[br0], [0xe0000016]
 +...in_dev_name:[br0], [0xe0000002]
 +...in_dev_name:[br0], [0xe0000001]
 +redirect:error:41.500:UTIL_pluginGetName:194:Enter--
 +redirect:error:41.501:UTIL_pluginGetName:201:Not null--
 +get_options:1198 register_result = 1
 +ifconfig: SIOCSIFFLAGS: Cannot assign requested address
 +Sorry, rule does not exist.
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +protect_mode:1 protect_threshold:64 protect_timer:200
 +packet length 2028
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +ip6tables: Bad rule (does a matching rule exist in that chain?).
 +$$$$$$$$(mcpd_nl_process_fio_support:775)
 +method = HW_NAT_TAB_CLEAN
 +done
 +done
 +ssk:error:42.075:ssk_processCommonMsg:2347:cannot handle msg type 0x1001100b
 +ssk:error:42.075:ssk_processCommonMsg:2208:Receive VOS_MSG_CONFIG_TR069_ACS msg.
 +
 +cmc:error:42.077:CMC_tr69cOmciSetCfg:2441:Get management server obj
 +eth1: starting interface.
 +httpd:error:42.254:UTIL_pluginGetName:194:Enter--
 +httpd:error:42.254:UTIL_pluginGetName:201:Not null--
 +eth2: starting interface.
 +cmc:error:42.369:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:42.369:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +eth3: starting interface.
 +cmc:error:42.590:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:42.590:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +cmc:error:43.004:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:43.004:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +route: SIOCDELRT: No such process
 +cmc:error:43.296:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:43.296:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +Error: an inet address is expected rather than "dev".
 +cmc:error:43.519:HAL_readLogPartial:87:Syslog disabled or log buffer not allocated
 +
 +cmc:error:43.520:stl_getLogInfo:306:readPtr = BCM_SYSLOG_READ_BUFFER_ERROR
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +tr69c:error:43.838:HAL_flashReadIteam:184:HAL_flashReadIteam() open file [/var/config/item/tr69c_transfer] fail 
 +
 +smd:error:71.300:smd_collectZombies:1283:found zombie: cmd=(nfqueued) pid=1810 name=nfqueued
 </code> </code>
  
Linha 48: Linha 675:
  
 Para versões mais recentes ou não listadas aqui, consultar o site oficial: [[https://anon.to/?https://www.furukawalatam.com/pt-br/pesquisa-resultado?q=ld420-10r&f=firmware|Furukawa]] Para versões mais recentes ou não listadas aqui, consultar o site oficial: [[https://anon.to/?https://www.furukawalatam.com/pt-br/pesquisa-resultado?q=ld420-10r&f=firmware|Furukawa]]
 +
 +=== V1.3.0 ===
 +
 +  * Stock, extraída de um aparelho funcional e reconstruída em UPF.
 +
 +[[https://tripleoxygen.net/files/devices/furukawa/ld420-10r/firmware/stock/G_ONU_LD420-10R_L3_V1.3.0.upf.zip|G_ONU_LD420-10R_L3_V1.3.0.upf.zip]] ( SHA256: 0ae02faf84808510af80f42811651c004bc8e8ecaf96712da4a12c54bd04b87a )
 +
 +=== V1.1 ===
 +
 +  * Stock, extraída de um aparelho funcional e reconstruída em UPF.
 +
 +[[https://tripleoxygen.net/files/devices/furukawa/ld420-10r/firmware/stock/G_ONU_LD420-10R_L3_V1.1.upf.zip|G_ONU_LD420-10R_L3_V1.1.upf.zip]] ( SHA256: d33d0819aa70ded1a039b2059a3839643d665f201525b3ae997fb1524f9b006a )
 +
  
 ==== Custom ==== ==== Custom ====
ont/furukawa/ld420-10r.1736330352.txt.gz · Última modificação: por tripleoxygen