ont:g-140w-h
Essa é uma revisão anterior do documento!
Tabela de conteúdos
Nokia G-140W-H
Informações sobre o Nokia G-140W-H Oi ONT/ONU. Teardown, hacking, unlocking (desbloqueio), firmwares, custom images, recuperação, bridge.
Este modelo é fornecido pela Oi Fibra.
Disclaimer
A maioria destes dispositivos são fornecidos pelo seu ISP em regime de comodato como parte do serviço fornecido. Todas as informações divulgadas aqui são de caráter informativo e pesquisa, sendo de sua inteira responsabilidade quaisquer implicações, perdas ou danos ao utilizá-las.
Todas as informações, métodos, procedimentos, firmwares, aplicativos e material sobre modificações e configurações postadas neste wiki foram criados pelo O3 Labs (salvo menção em contrário) e disponibilizadas GRATUITAMENTE desde o dia de sua elaboração. Denuncie quando possível quaisquer tentativas de venda destes material.
Hardware
| SoC | Broadcom BCM68461KRFBG - ARM Cortex A7 Dual Core @ 1000MHz |
|---|---|
| RAM | Micron MT41K256M16TW-107 - 4Gbit (512 MB) DDR3-1866 |
| Flash | Micron 29F2G08ABAGA - 2 Gbit (256 MB) SLC NAND |
| Switch | Integrado |
| USB | 2 x 2.0 |
| Wireless 2.4 GHz | Broadcom BCM43217 2×2 802.11b/g/n |
| Wireless 5 GHz | Broadcom BCM4352KMLG 3×3 802.11ac |
| GPON Transceiver | GN25L98 BOSA |
| FXS | 1 ( Intel/Lantiq S034NN19 SLLU3 ) |
| HPNA | Não |
| Serial | Sim |
| JTAG | Não |
Bootlog
----
BTRM
V1.1
MEMP
CACH
CODE
ZBSS
MAIN
OTP?
OTPP
USBT
NAND
IMG?
IMGL
UHD?
UHDP
RLO?
RLOP
UBI?
UBIP
PASS
----
HELO
CPU0
L1CD
MMUI
ZBBS
MAIN
5.0204patch2xponChina5-1.0.38-162.106
Boot Strap Register: 0x12000056
Status wait timeout: nandsts=0x30000000 mask=0x40000000, count=0
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NVRAM memcfg 0x427
MCB chksum 0x8fa11458, config 0x427
MemsysInit lpf0fc_generic 3.3.7.0 20180604
DDR3
82620304 80180000 801A0000 00000000 00000000 00204E9A
MCB rev=0x00060301 Ref ID=0x04E9A Sub Bld=0x002
Dram Timing 11-11-11
start of memsys_begin
mc_cfg_init(): Initialize the default values on mc_cfg
init_memc_dram_profile(): Initializing MEMC DRAM profile
---------------------------------------------------------------
MEMC DRAM profile (memc_dram_profile_struct) values:
====================================================
PART values:
part_speed_grade = 6
part_size_Mbits = 4096 (DRAM size in MegaBits)
part_row_bits = 15 (number of row bits)
part_col_bits = 10 (number of column bits)
part_ba_bits = 3 (number of bank bits)
part_width_bits = 16 (DRAM width in bits)
NUMER OF PARTS:
part_num = 1 (Number of parts)
TOTAL values:
total_size_Mbits = 4096 (DRAM size in MegaBits)
total_cs_bits = 0 (number of cs bits, for dual_rank mode)
total_width_bits = 16 (DRAM width in bits)
total_burst_bytes = 16 (Number of bytes per DRAM access)
total_max_byte_addr = 0x1fffffff (Maximum/last DRAM byte address)
(Number of bits in total_max_byte_addr is 29)
(i.e. total_max_byte_addr goes from bit 0 to bit 28)
ddr_2T_mode = 1
ddr_hdp_mode = 0
large_page = 1
ddr_dual_rank = 0
cs_mode = 0
MEMC timing (memc_dram_timing_cfg_struct) values:
====================================================
MC_CHN_TIM_TIM1_0 register fields:
tCwl = 8
tRP = 11
tCL = 11
tRCD = 11
MC_CHN_TIM_TIM1_1 register fields:
tCCD_L = 4
tCCD = 4
tRRD_L = 6
tRRD = 6
MC_CHN_TIM_TIM1_2 register fields:
tFAW = 32
tRTP = 6
tRCr = 39
MC_CHN_TIM_TIM1_3 register fields:
tWTR_L = 6
tWTR = 6
tWR_L = 12
tWR = 12
MC_CHN_TIM_TIM2 register fields:
tR2R = 0
tR2W = 2
tW2R = 2
tW2W = 0
tAL = 0
tRFC = 208
Poll PHY Status register
PHY Status= 1
Disable Auto-Refresh
refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=1)
[0x8018020c] = 0x8000b600
[0x80180200] = 0x00000305
End of memsys_begin
Add/Ctl Alignment
Coarse Adj=0x0B4 deg, cmd steps=0x072
reg 0x801A0080 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A0084 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A0088 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A008C set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A0090 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A0094 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A0098 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A009C set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00A0 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00A4 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00A8 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00AC set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00B0 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00B4 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00B8 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00BC set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00C0 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00C4 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00C8 set to VDL 0x039 with Fine Adj=0x01 deg
reg 0x801A00EC set to VDL 0x039 with Fine Adj=0x01 deg
ZQ Cal LP PHY
R in Ohm
P: Finger=0x2D0 Term=0x78 Drv=0x41
N: Finger=0x2D0 Term=0x78 Drv=0x41
PLL Ref(Hz)=0x02FAF080 UI STEPS=0x039
DDR CLK(MHz)=0x31B WL CLK dly(ps)=0x0C8 bitT(ps)=0x274 VDLsize(fs)=0x2B09 CLK_VDL=0x01A
start of memc_init
[0x80180004] = 0x0110061f
[0x80180234] = 0x00000501
Enable Auto-Refresh
refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=0)
[0x8018020c] = 0x0000b600
[0x80180110] = 0x11100f0e
[0x80180114] = 0x15141312
[0x80180118] = 0x19181716
[0x8018011c] = 0x001c1b1a
[0x80180124] = 0x04000000
[0x80180128] = 0x08070605
[0x8018012c] = 0x00000a09
[0x80180134] = 0x000d0c0b
Writing to MC_CHN_CFG_CNFG reg; data=0x00000000
[0x80180100] = 0x00000000
cfg_memc_timing_ctrl() Called
[0x80180214] = 0x080b0b0b
[0x80180218] = 0x04040606
[0x8018021c] = 0x20000627
[0x80180220] = 0x06060c0c
[0x80180224] = 0x120000d0
End of memc_init
start of pre_shmoo
[0x80180004] = 0xc110071f
end of pre_shmoo
SHMOO 28nm
801A0000 80180800 00000000 00020000 00000000
Shmoo WL
One UI Steps : 0x44
disable_dram_refresh
refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=1)
[0x8018020c] = 0x8000b600
auto-clk result = 023 (filter=0C steps)
initial CLK shift = 01A
final CLK shift = 023
disable_dram_refresh
refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=1)
[0x8018020c] = 0x8000b600
enable_dram_refresh
refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=0)
[0x8018020c] = 0x0000b600
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 S-----------X-------------------------------------------------------
01 S------------X------------------------------------------------------
Shmoo RD En
DQSN DRIVE PAD CONTROL (from) (to)
B0 0003196B 0007996B
B1 0003196B 0007996B
B0 RISE UI=1 VDL=1D PICK UI=2 VDL=1D
B1 RISE UI=1 VDL=1F PICK UI=2 VDL=1F
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 --S-----------------------+--X+++++++++++++++-----------------------
01 --S------------------------+-++X+++++++++++++++---------------------
Shmoo RD DQ NP
DQS :
B0 VDL=39 ok
B1 VDL=39 ok
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 -----+++++++++++++++++++++++X+++++++++++++++++++++++----------------
01 ------------++++++++++++++++++++++++X+++++++++++++++++++++++++------
02 ----++++++++++++++++++++++++X++++++++++++++++++++++++---------------
03 --------------+++++++++++++++++++++++X+++++++++++++++++++++++-------
04 -------+++++++++++++++++++++++X+++++++++++++++++++++++--------------
05 ------------++++++++++++++++++++++++X++++++++++++++++++++++++-------
06 ------++++++++++++++++++++++++X++++++++++++++++++++++++-------------
07 -------+++++++++++++++++++++++X++++++++++++++++++++++++-------------
08 ----------+++++++++++++++++++++++X++++++++++++++++++++++++----------
09 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
10 -----------+++++++++++++++++++++++X++++++++++++++++++++++++---------
11 --+++++++++++++++++++++++X++++++++++++++++++++++++------------------
12 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++++-----
13 ----++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
14 ------------++++++++++++++++++++++++X+++++++++++++++++++++++++------
15 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
Shmoo RD DQ P
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 -----+++++++++++++++++++++++X+++++++++++++++++++++++----------------
01 ------------++++++++++++++++++++++++X++++++++++++++++++++++++-------
02 -----+++++++++++++++++++++++X++++++++++++++++++++++++---------------
03 --------------++++++++++++++++++++++X+++++++++++++++++++++++--------
04 ------+++++++++++++++++++++++X++++++++++++++++++++++++--------------
05 ------------++++++++++++++++++++++++X++++++++++++++++++++++++-------
06 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
07 -------+++++++++++++++++++++++X++++++++++++++++++++++++-------------
08 ----------++++++++++++++++++++++++X++++++++++++++++++++++++---------
09 -----++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
10 ----------++++++++++++++++++++++++X+++++++++++++++++++++++++--------
11 -++++++++++++++++++++++++X++++++++++++++++++++++++------------------
12 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++++-----
13 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
14 ------------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
15 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
Shmoo RD DQ N
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 -----+++++++++++++++++++++++X++++++++++++++++++++++++---------------
01 ------------++++++++++++++++++++++++X+++++++++++++++++++++++++------
02 -----++++++++++++++++++++++++X++++++++++++++++++++++++--------------
03 -------------+++++++++++++++++++++++X++++++++++++++++++++++++-------
04 -------++++++++++++++++++++++++X++++++++++++++++++++++++------------
05 ------------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
06 ------++++++++++++++++++++++++X++++++++++++++++++++++++-------------
07 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
08 --------+-+++++++++++++++++++++++X++++++++++++++++++++++++----------
09 ---+++++++++++++++++++++++++X++++++++++++++++++++++++++-------------
10 ----------++++++++++++++++++++++++X++++++++++++++++++++++++---------
11 +++++++++++++++++++++++++X+++++++++++++++++++++++++-----------------
12 ----------++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
13 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
14 ----------+++++++++++++++++++++++++X++++++++++++++++++++++++++------
15 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
RD DQS adjustments :
BL0: Start: 0x39 Final: 0x39
BL1: Start: 0x39 Final: 0x39
Shmoo WR DQ
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 ----+++++++++++++++++++++++X++++++++++++++++++++++++----------------
01 --------+++++++++++++++++++++++++X++++++++++++++++++++++++++--------
02 --+++++++++++++++++++++++++X+++++++++++++++++++++++++---------------
03 -----------++++++++++++++++++++++++X++++++++++++++++++++++++--------
04 -----++++++++++++++++++++++++X+++++++++++++++++++++++++-------------
05 -------------+++++++++++++++++++++++X+++++++++++++++++++++++--------
06 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
07 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------
08 --------++++++++++++++++++++++++X+++++++++++++++++++++++++----------
09 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------
10 -----------++++++++++++++++++++++++X++++++++++++++++++++++++--------
11 -++++++++++++++++++++++++X+++++++++++++++++++++++++-----------------
12 ----------+++++++++++++++++++++++++X++++++++++++++++++++++++++------
13 --++++++++++++++++++++++++X+++++++++++++++++++++++++----------------
14 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++-------
15 --+++++++++++++++++++++++++X+++++++++++++++++++++++++---------------
Shmoo WR DM
WR DM
00000000001111111111222222222233333333334444444444555555555566666666
01234567890123456789012345678901234567890123456789012345678901234567
00 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++----------
01 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------
start of memsys_end
[0x80180004] = 0x8110071f
[0x80180010] = 0x00000009
end of memsys_end
DDR test done successfully
FPS0
----
PAR1
U998
COM0
UBI#
03E6
BT98
0008
----
PAR2
U998
COM0
UBI#
03E6
BT98
0328
----
FAL2
TRY1
NAN3
UBI!
NAN5
Base: 5.2_04patch2xponChina5
CFE version 1.0.38-162.106 for BCM96846 (32bit,SP,LE)
Build Date: Mar-31-2020--23:07:25 (buildmgr@AONT26)
Copyright (C) 2000-2015 Broadcom Corporation.
Boot Strap Register: 0x12000056
Chip ID: BCM68461_A1, ARM Cortex A7 Dual Core: 1000MHz
RDP: 1000MHz
Total Memory: 536870912 bytes (512MB)
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: Micron MT29F2G08ABA, id 0x2cda block 128KB size 262144KB
Take PMC out of reset
waiting for PMC finish booting
PMC rev: 3.1.6 running
Dump Current setting of SWREGs
1.0D, reg=0x00, val=0xc690
1.0D, reg=0x01, val=0x0d06
1.0D, reg=0x02, val=0xcb12
1.0D, reg=0x03, val=0x5171
1.0D, reg=0x04, val=0x0000
1.0D, reg=0x05, val=0x0702
1.0D, reg=0x06, val=0x9400
1.0D, reg=0x07, val=0x0029
1.0D, reg=0x08, val=0x0c02
1.0D, reg=0x09, val=0x0071
1.8 , reg=0x00, val=0xc690
1.8 , reg=0x01, val=0x0d06
1.8 , reg=0x02, val=0xcb12
1.8 , reg=0x03, val=0x5170
1.8 , reg=0x04, val=0x0000
1.8 , reg=0x05, val=0x0702
1.8 , reg=0x06, val=0xb000
1.8 , reg=0x07, val=0x0029
1.8 , reg=0x08, val=0x0c02
1.8 , reg=0x09, val=0x0071
1.5 , reg=0x00, val=0xc690
1.5 , reg=0x01, val=0x0d06
1.5 , reg=0x02, val=0xcb12
1.5 , reg=0x03, val=0x5170
1.5 , reg=0x04, val=0x0000
1.5 , reg=0x05, val=0x0702
1.5 , reg=0x06, val=0xb000
1.5 , reg=0x07, val=0x0029
1.5 , reg=0x08, val=0x0c02
1.5 , reg=0x09, val=0x0071
1.0A, reg=0x00, val=0xc690
1.0A, reg=0x01, val=0x0d06
1.0A, reg=0x02, val=0xcb12
1.0A, reg=0x03, val=0x5170
1.0A, reg=0x04, val=0x0000
1.0A, reg=0x05, val=0x0702
1.0A, reg=0x06, val=0xb000
1.0A, reg=0x07, val=0x0029
1.0A, reg=0x08, val=0x0c02
1.0A, reg=0x09, val=0x0071
pmc_init:PMC using DQM mode
BOARD.G140WH PIN MUX Init done
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host/tftp (f/h/c) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Default host ramdisk file name :
Default ramdisk store address :
Default DTB file name :
Board Id : G140WH
Number of MAC Addresses (1-64) : 12
Base MAC Address : dc:d9:ae:xx:xx:xx
PSI Size (1-128) KBytes : 128
Enable Backup PSI [0|1] : 0
System Log Size (0-256) KBytes : 64
Auxillary File System Size Percent: 0
GPON Serial Number : "3FE480XXXXXX"
GPON Password : " "
Operator Id : "BRZL"
RNR_TBLS memory allocation (MB) : 4
FPM_POOL memory allocation (MB) : 16
DHD 0 memory allocation (MB) : 0
DHD 1 memory allocation (MB) : 0
DHD 2 memory allocation (MB) : 0
WLan Feature : 0x00
Voice Board Configuration (0-33) : LE9652_ZSI_IB
Partition 1 Size (MB) :
Partition 2 Size (MB) :
Partition 3 Size (MB) :
Partition 4 Size (MB) (Data) : 4MB
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting kernel from image (0x00100000) ...
ubi_find_file: got vmlinux.lz size 2290479
Decompression LZMA Image OK!
Entry at 0x00018000
Starting program at 0x00018000
L04 -> rootfs:2
rfs_part:2
bstart:0xfcbaac bcnt:16562856 0xfcbaa8
ubi_find_file: got 96846.dtb size 2348
/memory = 0x20000000 bytes @ 0x0
rdp param2 value 0x800000 in device tree larger than nvram value 0x400000. Use device tree value!
Appending NVRAM to dtb, ret:0
Booting Linux on physical CPU 0x0
Linux version 4.1.45 (buildmgr@AONT26) (gcc version 5.3.0 (Buildroot 2016.02) ) #1 SMP PREEMPT Tue Mar 31 23:13:58 CST 2020
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Broadcom BCM96846
Memory policy: Data cache writealloc
PERCPU: Embedded 11 pages/cpu @dfbde000 s16192 r8192 d20672 u45056
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123904
Kernel command line: coherent_pool=2M cpuidle_sysfs_switch pci=pcie_bus_safe bootversion=Mar-31-2020--23:07:20
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 487748K/499712K available (4166K kernel code, 181K rwdata, 1300K rodata, 180K init, 637K bss, 11964K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0018000 - 0xc056ea68 (5467 kB)
.init : 0xc056f000 - 0xc059c000 ( 180 kB)
.data : 0xc059c000 - 0xc05c9520 ( 182 kB)
.bss : 0xc05c952c - 0xc0668adc ( 638 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here
Remapping interrupts...
hwirq virq
43 20
44 21
45 22
46 23
47 24
48 25
61 26
124 27
125 28
70 29
213 30
214 31
215 32
216 33
217 34
218 35
219 36
220 37
92 38
93 39
154 40
155 41
156 42
157 43
131 44
130 45
160 46
161 47
162 48
163 49
164 50
165 51
166 52
167 53
168 54
169 55
170 56
171 57
172 58
173 59
174 60
175 61
176 62
177 63
178 64
179 65
180 66
181 67
182 68
183 69
184 70
185 71
186 72
187 73
188 74
189 75
190 76
191 77
146 78
Remapping IO memories...
phys virt size
0000000080180000 00000000e0840000 00024000
00000000ffb00000 00000000e0808000 00006000
00000000ffb20000 00000000e0802000 00001000
0000000082000000 00000000e1000000 01000000
00000000ff800000 00000000e0810000 00003000
00000000ff854000 00000000e0814000 00001000
00000000ff858000 00000000e0818000 00003000
00000000ffe00000 00000000e0a00000 00100000
00000000ff860000 00000000e081c000 00002000
0000000083058600 00000000e0816600 00000100
000000008000c000 00000000e0820000 00003fff
0000000082db2000 00000000e0826000 00001000
000000008300c000 00000000e0828000 00001000
0000000083020000 00000000e082a000 00001000
0000000083038000 00000000e082c000 00001000
0000000083058000 00000000e082e000 00001000
0000000083064000 00000000e0830000 00001000
0000000083080000 00000000e0832000 00001000
00000000830a0000 00000000e0834000 00001000
00000000830a4000 00000000e0836000 00001000
00000000830ac000 00000000e0838000 00001000
00000000810a0000 00000000e083a000 00001000
0000000081060000 00000000e083c000 00003000
00000000ffff0000 00000000e0866000 00001000
0000000083000000 00000000e0868000 00001000
00000000830c0000 00000000e086a000 00001000
console [ttyS0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
--Kernel Config--
SMP=1
PREEMPT=1
DEBUG_SPINLOCK=0
DEBUG_MUTEXES=0
CPU: Testing write buffer coherency: ok
Broadcom Logger v0.1
Setting up static identity map for 0x18220 - 0x18254
Reserved memory mapping...
phys virt size
fpm_pool 0x0f000000 0xcf000000 0x01000000
rnr_tbls 0x0e800000 0xce800000 0x00800000
pmc_init:PMC using DQM mode
Successfully retrieved NVRAM data from dtb
Failed to retrieve boot CFE version from dtb!
Brought up 2 CPUs
SMP: Total of 2 processors activated (200.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
Toggle reset of XRDP core...
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated
skb_free_task created successfully with start budget 256
gbpm_do_work scheduled
BLOG v3.0 Initialized
BLOG Rule v1.0 Initialized
Broadcom IQoS v0.1 initialized
Broadcom GBPM v0.1 initialized
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) (SUMMARY) Â 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
io scheduler noop registered (default)
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x6532845b timing_2 to 0x00091e94
bcm63xx_nand ff801800.nand: detected 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
nand: WARNING: brcmnand.0: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
Creating 9 MTD partitions on "brcmnand.0":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000100000 : "nvram"
0x000000100000-0x000002900000 : "image0"
0x000002900000-0x000005100000 : "image1"
0x000005100000-0x000006000000 : "logfs"
0x000006000000-0x000006800000 : "cfgfs"
0x000006800000-0x000006e00000 : "extfs"
0x000006e00000-0x000008000000 : "diagfs"
0x000008000000-0x000010000000 : "datafs"
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
NET: Registered protocol family 24
i2c /dev entries driver
bcm96xxx-wdt ff800480.watchdog: Broadcom BCM96xxx watchdog timer
brcmboard registered
brcmboard: brcm_board_init entry
print_rst_status: RESET reason: 0x00000000
DYING GASP IRQ Initialized and Enabled
map_hw_timer_interrupt,127: interrupt_id 20
map_hw_timer_interrupt,127: interrupt_id 21
map_hw_timer_interrupt,127: interrupt_id 22
map_hw_timer_interrupt,127: interrupt_id 23
watchdog: add to proc fs ok
printTaskInfo enter
down
hw watchdog enabled
BOARD.G140WH PIN MUX Init done
[brcm_board_init] done
Serial: BCM63XX driver $Revision: 3.00 $
Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands)
ttyS0 at MMIO 0xff800640 (irq = 27, base_baud = 921600) is a BCM63XX
i2c-bcm63000 ff802100.i2c: Broadcom BCM96xxx I2C driver
bcm_i2c: check_sfp_i2c_device i2c bus 0 sfp soldered on board, add clients...
bcm_i2c: add_sfp_i2c_client i2c device at address 0x60 does not exist!
bcm_i2c: add_sfp_i2c_client i2c device at address 0x61 does not exist!
bcm_i2c: add_sfp_i2c_client i2c device at address 0x66 does not exist!
init the i2c bus0 sfp...
WAN module detected on i2c bus 0:
[NTC i2c] get_client: bus 0 client 0 does not exist
Opticaldet: No TRX found on bus 0 rc -1 type 68
brcm_ponmode_add_fs...
brcm_ponmode_add_fs ok.
1Optical detection module loaded.
GACT probability on
u32 classifier
Performance counters on
input device check on
Actions configured
nf_conntrack version 0.5.0 (7621 buckets, 30484 max)
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Ebtables v2.0 registered
ebt_time registered
ebt_ftos registered
ebt_wmm_mark registered
8021q: 802.1Q VLAN Support v1.8
Registering SWP/SWPB emulation handler
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "image0", size 40 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 320, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1735696301
ubi0: available PEBs: 0, total reserved PEBs: 320, PEBs reserved for bad PEB handling: 7
ubi0: background thread "ubi_bgt0d" started, PID 289
block ubiblock0_0: created from ubi0:0(rootfs_ubifs)
VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
devtmpfs: mounted
Freeing unused kernel memory: 180K
[1970-01-01 00:00:03]MSG: system starting
MSG: ubi_part=logfs ubi_port=/logs
CMD: /opt/mtdtools/ubiattach /dev/ubi_ctrl -m 4 -d 4
ubi4: attaching mtd4
ubi4: scanning is finished
ubi4: attached mtd4 (name "logfs", size 15 MiB)
ubi4: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi4: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi4: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi4: good PEBs: 120, bad PEBs: 0, corrupted PEBs: 0
ubi4: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi4: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 536678352
ubi4: available PEBs: 0, total reserved PEBs: 120, PEBs reserved for bad PEB handling: 4
ubi4: background thread "ubi_bgt4d" started, PID 630
CMD: mount -t ubifs /dev/ubi4_0 /logs
UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 640
UBIFS (ubi4:0): recovery needed
UBIFS (ubi4:0): recovery completed
UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "0"
UBIFS (ubi4:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi4:0): FS size: 12951552 bytes (12 MiB, 102 LEBs), journal size 2158592 bytes (2 MiB, 17 LEBs)
UBIFS (ubi4:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi4:0): media format: w4/r0 (latest is w4/r0), UUID B4ABB60F-477F-4E63-8521-65E3ECE095AF, small LPT model
UBIFS (ubi4:0): c->vi.name = 0 mount ok
MSG: mount /dev/ubi4_0 /logs with ubi_err=0
MSG: /logs size is 11008KB
MSG: touch /logs/.tag.ubifswr with ubi_err=0
MSG: ubi_part=cfgfs ubi_port=/configs
CMD: /opt/mtdtools/ubiattach /dev/ubi_ctrl -m 5 -d 5
ubi5: attaching mtd5
ubi5: scanning is finished
ubi5: attached mtd5 (name "cfgfs", size 8 MiB)
ubi5: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi5: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi5: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi5: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi5: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi5: max/mean erase counter: 11/4, WL threshold: 4096, image sequence number: 1333018123
ubi5: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi5: background thread "ubi_bgt5d" started, PID 666
CMD: mount -t ubifs /dev/ubi5_0 /configs
UBIFS (ubi5:0): background thread "ubifs_bgt5_0" started, PID 676
UBIFS (ubi5:0): recovery needed
UBIFS (ubi5:0): recovery completed
UBIFS (ubi5:0): UBIFS: mounted UBI device 5, volume 0, name "1"
UBIFS (ubi5:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi5:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs)
UBIFS (ubi5:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi5:0): media format: w4/r0 (latest is w4/r0), UUID 7601A367-8AE3-47CA-A957-EB2FE20D118E, small LPT model
UBIFS (ubi5:0): c->vi.name = 1 mount ok
MSG: mount /dev/ubi5_0 /configs with ubi_err=0
MSG: /configs size is 4584KB
MSG: touch /configs/.tag.ubifswr with ubi_err=0
MSG: ubi_part=datafs ubi_port=/flash
CMD: /opt/mtdtools/ubiattach /dev/ubi_ctrl -m 8 -d 8
ubi8: attaching mtd8
ubi8: scanning is finished
ubi8: attached mtd8 (name "datafs", size 128 MiB)
ubi8: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi8: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi8: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi8: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi8: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi8: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 216512877
ubi8: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 16
ubi8: background thread "ubi_bgt8d" started, PID 702
CMD: mount -t ubifs /dev/ubi8_0 /flash
UBIFS (ubi8:0): background thread "ubifs_bgt8_0" started, PID 712
UBIFS (ubi8:0): recovery needed
UBIFS (ubi8:0): recovery completed
UBIFS (ubi8:0): UBIFS: mounted UBI device 8, volume 0, name "0"
UBIFS (ubi8:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi8:0): FS size: 125579264 bytes (119 MiB, 989 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi8:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi8:0): media format: w4/r0 (latest is w4/r0), UUID 451F7FEF-C177-437E-8D2B-383C7F17F377, small LPT model
UBIFS (ubi8:0): c->vi.name = 0 mount ok
MSG: mount /dev/ubi8_0 /flash with ubi_err=0
MSG: /flash size is 112736KB
MSG: touch /flash/.tag.ubifswr with ubi_err=0
MSG: ubi_part=log ubi_port=/logs
MSG: ubi_part=cfg ubi_port=/configs
MSG: ubi_part=data ubi_port=/flash
sh: can't open '/usr/exe/ckpswd.sh'
logrotate: Starting subsystem
logrotate: rotation for *.err ...
logrotate: rotation for *.log ...
/etc/init.d/rcS: /etc/rcS.d/S86rgw.sh: line 17: can't create /proc/sys/vm/oom-kill: nonexistent directory
ONT_TYPE=g140wh
PON_MODE=GPON
SOFTWAREVERSION=CGC.B30p01
PRODUCTCLASS=g140wh
RELEASE=0.0.0
BUILDSTAMP=
BUILDDATE=20200331_2305
COPYRIGHT=ASB
WHOBUILD=buildmgr
IMAGEVERSION=3FE48077CGCB30
NODE=f68d89874b24ab39df36f4376fbe5c087490cf29
REPO=sw
SIGN=n
VOIP=sip
CONFIG_VOIP_SW=cvp
CVP_REVISION=8b91a1ffef9f12a49025b7569install nand_drv driver!
76cff1f961154ed
insmod nand_drv ...
insmod extfs ...
[extfs.drv]init: name=extfs size=0x600000 backups.offset=0x300000 erasesize=0x20000 writesize=0x800
[extfs.drv]module init.
extfstool add BOSA success.
insmod scfg module ...
scfg module install ok.
[hcfg] try to load /usr/cfg/hcfg/3FE48055AAAA.cfg
### Active Image ###
Image 0, Version : 00000000 00000000 3FE48077CGCB30
insmod gpio_mgr ...
board_type: G140WH
gpio_mgr_init succ
insmod netlinkmsg ...
init netlink in netlinkmsg.ko
superd start ...
inmod led_drv ...
Preparing to load uplink driver ...
Establish bosa symbol link ...
Loading bosa gn25l98 ...
***load GN25L98 bosa***
Can't find /configs/bosa/cfg.bob
bosa init done.
insmod lantiq SLIC driver ...
IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH
TAPI, Version 4.14.0.3, (c) 2001-2014 Lantiq Deutschland GmbH
IFX DUSLIC XS device driver, version 1.0.0.4, (c) 2014 Lantiq Deutschland GmbH
insmod button_driver ...
button_task_init: btn_get_cfgtbl success
btn_poll_task_init: kthread_run btn_poll_task success
btn_event_task_init: success
insmod pwrmngtd.ko ...
pwrmngtd: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
restore tr069.conf ...
cp: can't stat '/etc/xmpp.conf': No such file or directory
chmod: /configs/xmpp/xmpp.conf: No such file or directory
cp: can't stat '/etc/xmpp_saas.conf': No such file or directory
chmod: /configs/xmpp/xmpp_saas.conf: No such file or directory
startup thttpd ...
check igmpproxy.conf ...
startup data guardian ...
startup pwrmgr ...
check certificate files before ONU registry...
rsyslog start TZ ev /etc/localtime
Generating rsyslog.conf
rsyslogd starting
/bcm/script/check_certificate_files.sh: cd: line 37: can't cd to /configs/X509
/bcm/script/check_certificate_files.sh: cd: line 48: can't cd to /logs/configs_key_data_bak/X509
certificate files are damaged in both /configs and /logs, cannot fix!
Loading drivers and kernel modules...
Initializing WLCSM Module
WLCSM Module loaded successfully
PCIe HCD (impl1)
bcm963xx-pcie: found port [0] GEN2 Core Rev [3.21] with 1 Lanes
bcm963xx-pcie bcm963xx-pcie.0: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x90000000-0x900fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x90007fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x90000000-0x900fffff]
pcieport 0000:00:00.0: enabling device (0140 -> 0142)
pcieport 0000:00:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
bcm963xx-pcie: found port [1] GEN2 Core Rev [3.21] with 1 Lanes
bcm963xx-pcie bcm963xx-pcie.1: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff]
pci_bus 0001:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0xa0000000-0xa00fffff]
pcieport 0001:00:00.0: enabling device (0140 -> 0142)
pcieport 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
pci 0001:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
NBUFF v1.0 Initialized
Total # of labels = 62
Initialized fcache state
Broadcom Packet Flow Cache Char Driver v4.0 Registered<3002>
Created Proc FS /procfs/fcache
Broadcom Packet Flow Cache registered with netdev chain
Broadcom Packet Flow Cache learning via BLOG enabled.
[FHW] pktDbgLvl[0xbf6c88c4]=0
[FHW] fhw_construct:
Initialized Fcache HW accelerator layer state
flwStatsThread created. numFlwsPerPoll 16383 maxFlwIdx 16383
Constructed Broadcom Packet Flow Cache v4.0
BPM: tot_mem_size=536870912B (512MB), buf_mem_size <9%> =48318381B (46MB), num of buffers=17975, buf size=2688
Broadcom BPM Module Char Driver v0.1 Registered<3004>
Board not populated with PMD
usbcore: registered new interface driver usblp
wan_scratchpad_get: pon_mode gpon, wan_def_rate 0101GPON, wan_def_type GPON
Scratch pad is not initialized.
No scratch pad found. Initialize scratch pad...
RDPA_MW: scratchpad get_or_init: WanRate - 0101GPON
RDPA_MW: scratchpad get_or_init: RdpaWanType - GPON
RDPA_MW: scratchpad get: DpuSplitSMode - œÙ»œÙŒœÙŒœÙÐœÙRo¿
RDPA_MW: scratchpad get: IptvTableSize -
RDPA_MW: scratchpad get: QmUsQueueSize -
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
Creating CPU ring for queue number 17 with 16384 packets descriptor=0xbf4a9fe8, size_of_entry 8
Done initializing Ring 17 Base=0xd7840000 num of entries= 16384 RDD Base=17840000 descriptor=0xbf4a9fe8
Creating CPU ring for queue number 18 with 16384 packets descriptor=0xbf4aa048, size_of_entry 8
Done initializing Ring 18 Base=0xd7880000 num of entries= 16384 RDD Base=17880000 descriptor=0xbf4aa048
Creating CPU ring for queue number 16 with 16384 packets descriptor=0xbf4a9f88, size_of_entry 8
Done initializing Ring 16 Base=0xd78c0000 num of entries= 16384 RDD Base=178c0000 descriptor=0xbf4a9f88
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
wan_scratchpad_get: pon_mode gpon, wan_def_rate 0101GPON, wan_def_type GPON
RDPA_MW: scratchpad get_or_init: WanRate - 0101GPON
RDPA_MW: scratchpad get_or_init: RdpaWanType - GPON
[INF gponSerdes] wan_serdes_config: SERDES: Wan type: GPON
[ERROR gponSerdes] PowerOffDevice,802: SERDES: Should be implemented in pmc drv!!!
[ERROR gponSerdes] PowerOnDevice,814: SERDES: Should be implemented in pmc drv!!!
[INF gponSerdes] pon_drv_gpon_init: SERDES:
serdes initialization: GPON Start
[INF gponSerdes] sgb_rescal_init: SERDES:
WAN_TOP_RESCAL_STATUS_0 =0x6400013
[INF gponSerdes] pon_drv_gpon_init: SERDES:
serdes initialization: Done
[INF gponSerdes] wan_serdes_config: SERDES: Load microcode ...
[INF gponSerdes] serdes_firmware_download: SERDES: TMP SKIP ...
bp_parse:L419 Parsing board configuration for G140WH
_assign_port_class:L161 set sw0 type 0
sw_create:L319 created sw0(name: )/parent:none
read_init_cfg:L1128 system init_cfg: gbe_wan_emac=9
_assign_port_class:L161 set port0 type 1
enslave_port:L294 enslave port0 -> sw0
DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=1 (EGPHY) c065faf4
DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4800 macId=0 (UNIMAC) c065f9dc
bp_parse_port_cap:L102 Unit 0, Port 0, (null) LAN/WAN Capability: LAN/WAN
bp_parse_port:L405 backward compat unit 0 port 0 -> port_0:0
bp_parse_port:L408 backward oam unit 0 port 0 -> 0
_assign_port_class:L161 set port1 type 1
enslave_port:L294 enslave port1 -> sw0
DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=2 (EGPHY) c065fb48
DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4600 macId=1 (UNIMAC) c065f9e8
bp_parse_port_cap:L102 Unit 0, Port 1, (null) LAN/WAN Capability: LAN/WAN
bp_parse_port:L405 backward compat unit 0 port 1 -> port_0:1
bp_parse_port:L408 backward oam unit 0 port 1 -> 1
_assign_port_class:L161 set port2 type 1
enslave_port:L294 enslave port2 -> sw0
DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=3 (EGPHY) c065fb9c
DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4400 macId=2 (UNIMAC) c065f9f4
bp_parse_port_cap:L102 Unit 0, Port 2, (null) LAN/WAN Capability: LAN/WAN
bp_parse_port:L405 backward compat unit 0 port 2 -> port_0:2
bp_parse_port:L408 backward oam unit 0 port 2 -> 2
_assign_port_class:L161 set port3 type 1
enslave_port:L294 enslave port3 -> sw0
DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=4 (EGPHY) c065fbf0
DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4200 macId=3 (UNIMAC) c065fa00
bp_parse_port_cap:L102 Unit 0, Port 3, (null) LAN/WAN Capability: LAN/WAN
bp_parse_port:L405 backward compat unit 0 port 3 -> port_0:3
bp_parse_port:L408 backward oam unit 0 port 3 -> 3
DBGV>create_rdpa_port:L835 (if=1e, emac=9, owner= (null))
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
create_rdpa_port:L896 Created RDPA port: port/index=switch
port_runner_sw_init:L1174 Initialized runner switch sw0
enet_create_netdevice:L1691 registered netdev bcmsw for sw0
kerSysGetMacAddress:0
demux_on_sw:L239 demux port_0:0: sw0:3
DBGV>create_rdpa_port:L835 (if=3, emac=0, owner= (null))
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=0
create_rdpa_port:L896 Created RDPA port: port/index=lan0
port_runner_port_init:L1082 Initialized runner port port_0:0
enet_create_netdevice:L1691 registered netdev eth0 for port_0:0
kerSysGetMacAddress:0
port_mtu_set:L522 port mtu set port_0:0: mtu:1998
port_init:L578 initialized object port_0:0
demux_on_sw:L239 demux port_0:1: sw0:4
DBGV>create_rdpa_port:L835 (if=4, emac=1, owner= (null))
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=1
create_rdpa_port:L896 Created RDPA port: port/index=lan1
port_runner_port_init:L1082 Initialized runner port port_0:1
enet_create_netdevice:L1691 registered netdev eth1 for port_0:1
kerSysGetMacAddress:0
port_mtu_set:L522 port mtu set port_0:1: mtu:1998
port_init:L578 initialized object port_0:1
demux_on_sw:L239 demux port_0:2: sw0:5
DBGV>create_rdpa_port:L835 (if=5, emac=2, owner= (null))
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=2
create_rdpa_port:L896 Created RDPA port: port/index=lan2
port_runner_port_init:L1082 Initialized runner port port_0:2
enet_create_netdevice:L1691 registered netdev eth2 for port_0:2
kerSysGetMacAddress:0
port_mtu_set:L522 port mtu set port_0:2: mtu:1998
port_init:L578 initialized object port_0:2
demux_on_sw:L239 demux port_0:3: sw0:6
DBGV>create_rdpa_port:L835 (if=6, emac=3, owner= (null))
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=3
create_rdpa_port:L896 Created RDPA port: port/index=lan3
port_runner_port_init:L1082 Initialized runner port port_0:3
enet_create_netdevice:L1691 registered netdev eth3 for port_0:3
kerSysGetMacAddress:0
port_mtu_set:L522 port mtu set port_0:3: mtu:1998
port_init:L578 initialized object port_0:3
sw_init:L649 initialized sw0
Creating CPU ring for queue number 4 with 1024 packets descriptor=0xbf4a9b08, size_of_entry 16
Done initializing Ring 4 Base=0xd7808000 num of entries= 1024 RDD Base=17808000 descriptor=0xbf4a9b08
Creating CPU ring for queue number 3 with 1024 packets descriptor=0xbf4a9aa8, size_of_entry 16
Done initializing Ring 3 Base=0xd7820000 num of entries= 1024 RDD Base=17820000 descriptor=0xbf4a9aa8
enetxapi_queues_init:L513 configured RDPA CPU queues
Broadcom 802.1Q VLAN Interface, v0.1
Loading gponstack module...
LOGGER driver Init Done: 0
Loading bcmgpon module...
INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
INF: bdmf_neINF: bdmf_mattr_set#4142: : success. bdmf_mattr_set()
w_and_set#491Creating CPU ring for queue number 6 with 512 packets descriptor=0xbf4a9bc8, size_of_entry 16
Done initializing Ring 6 Base=0xd7814000 num of entries= 512 RDD Base=17814000 descriptor=0xbf4a9bc8
INF: bdmf_attrelem_set_as_num#1150: system: success. attribute:cpu_reason_to_tc value:6
INF: bdmf_attrelem_set_as_num#1150: cpu/index=host: success. attribute:tc_to_rxq value:6
: port: succe[NTC ploamFsm] printSerialPasswd: SN=33:46:45:34:XX:XX:XX:XX
[NTC ploamFsm] printSerialPasswd: PW=20:20:20:20:20:20:20:20:20:20
dgasp: kerSysRegisterDyingGaspHandler: gpon0 registered
[NTC ploamFsm] bcm_ploamCreate: ploam driver created.
Creating CPU ring for queue number 5 with 64 packets descriptor=0xbf4a9b68, size_of_entry 16
Done initializing Ring 5 Base=0xd7817000 num of entries= 64 RDD Base=17817000 descriptor=0xbf4a9b68
ss: object:port/index=wan0
INF: bdmf_new_and_set#491: gpon: success: object:gpon
INF: bdmf_attrelem_set_as_num#1150: port/index=wan0: success. attribute:cpu_obj value:-567351668
INF: bdmf_attrelem_set_as_num#1150: system: success. attribute:cpu_reason_to_tc value:5
INF: bdmf_attrelem_set_as_num#1150: cpu/index=host: success. attribute:tc_to_rxq value:5
Initializing bdmf shell...
Loading resource management module...
Initializing system...
insmod phy_driver...
Install phyadpt.ko
Loading Gpon....
Initializing port...
ploam begin
Loading bcm ioctl driver....
Loading klpd driver...
insmod: can't insert '/lib/driver/klpd.ko': unknown symbol in module or invalid parameter
Loading bridge fast-path module...
Loading flow cache module...
Loading conntrack module and iptables...
insmod: can't read '/lib/modules/4.1.45/nf_conntrack.ko': No such file or directory
Loading USB Module...
insmod: can't insert '/lib/modules/4.1.45/usblp.ko': File exists
insmod bcmhook...
Loading bcm wlan module...
/configs/bcm dir exists
bcm43217_map.bin exists
bcm4352_map.bin exists
bcm43217_nvramvars.bin exists
bcm4352_nvramvars.bin exists
bcmcmn_nvramvars.bin exists
pid 1644's current scheduling policy: SCHED_OTHER
pid 1644's current scheduling priority: 0
pid 1644's new scheduling policy: SCHED_RR
pid 1644's new scheduling priority: 5
pid 1651's current scheduling policy: SCHED_OTHER
pid 1651's current scheduling priority: 0
pid 1651's new scheduling policy: SCHED_RR
pid 1651's new scheduling priority: 5
pid 1647's current scheduling policy: SCHED_OTHER
pid 1647's current scheduling priority: 0
pid 1647's new scheduling policy: SCHED_RR
pid 1647's new scheduling priority: 5
pid 1654's current scheduling policy: SCHED_OTHER
pid 1654's current scheduling priority: 0
pid 1654's new scheduling policy: SCHED_RR
pid 1654's new scheduling priority: 5
insmod dyingasp...
Loading iptv...
Loading linux_if
Loading linux bridge...
Initializing filter...
Loading igmp driver...
igmpdrv k_igmp_drv_init
igmpmap IgmpMapFilterConfig IPTV Filter mode changed from 1 to 5
Loading dhcp driver...
====================@VoIP: starting@=================
[startup] appmgr starting
[startup] runing /bin/messagebus start &
[startup] runing /sbin/msgmgr &
$Starting system message bus:
====================@VoIP: started@=================
Start diagnosis
add_omci_ssh_user...
Start daemon...
run after app start...
Daemon silent 120 second!
run selftest ...
phy_test PHY[0] vendor ID: 0xae0251e1
phy_test PHY[1] vendor ID: 0xae0251e1
phy_test PHY[2] vendor ID: 0xae0251e1
phy_test PHY[3] vendor ID: 0xae0251e1
phy: OK
bosa: OK
Please check with PCIe nodes...
0000 14e46846 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e4a8db 26 90000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl
0000 14e46846 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e44360 27 a0000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl
wifi: OK
slac: OK
There is 2 USB device on this ONU
There is no USB device inserted !
usb: OK
selftest 5/5 PASS
there is no LED indication for G140WH
main selftest OK!
Go checking phy_ed_thresh
MSG: start mdev
wl: Not up
sh: -60: unknown operand
[startup] runing /sbin/ledmgr &
[startup] runing /sbin/wifihostd &
[startup] runing /sbin/ndk_wand &
[startup] runing /sbin/rgwd &
[startup] loading cfgmgr
[startup] runing /sbin/cfgmgr
INFO: boot fail count: 3
[IPC_TIMER]Start timer ...
[ndbus][dbus][1994: 0xb6fa7000][22.022388][wa][ndk_timer][ndbusMainLoop:555]Main thread errno address:0xb6fa74d0
[ndbus][dbus][1994: 0xb6d4c470][22.030681][wa][ndk_timer][thread_entry:463]Child thread errno address:0xb6d4c940
system_call+150: touch /tmp/WLAN_IS_RUNNING
ERR: cfgmgr is crashed or blocked.
[1970-01-01 00:00:22]MSG: startupdone.as cfgmgr not ready 1 times
[ndbus][dbus][2056: 0xb6fb5000][22.544750][wa][ledmgr][ndbusMainLoop:555]Main thread errno address:0xb6fb54e4
[ndbus][dbus][2056: 0xb62ca450][22.551237][wa][ledmgr][thread_entry:463]Child thread errno address:0xb62ca934
wl_dyn_bwsw_params: fail to set 1
error
Setting SSID: "BCM11AC_0"
Setting SSID: "BCM11AC_1"
Setting SSID: "BCM11AC_2"
Setting SSID: "BCM11AC_3"
% Unknown command.
% Unknown command.
Hello, Welcome to User CLI (version 0.95).
user> ndk wand starting ...
rgwd starting ...
rgw_wan_init
NRAppSysConfig
--------------------------------------------------------
platform: 1
uplink_mode: 1
--------------------------------------------------------
[ndbus][dbus][2112: 0xb6f9b000][23.147364][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadHostsCache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2109: 0xb6f6fb60][23.195194][wa][ndk_wand][ndbusMainLoop:555]Main thread errno address:0xb6f70030
[ndbus][dbus][2109: 0xb67f8450][23.201229][wa][ndk_wand][thread_entry:463]Child thread errno address:0xb67f8920
wl: Unsupported
wl: Unsupported
wl: Unsupported
wl: Unsupported
Setting SSID: "BCM11BGN_0"
Setting SSID: "BCM11BGN_1"
Setting SSID: "BCM11BGN_2"
Setting SSID: "BCM11BGN_3"
[ndbus][dbus][2112: 0xb6f9b000][24.411666][wa][rgwd][ndbusMainLoop:555]Main thread errno address:0xb6f9b4d0
[ndbus][dbus][2112: 0xb67de450][24.419145][wa][rgwd][thread_entry:463]Child thread errno address:0xb67de920
[startup] cfgmgr is running
wl: Unsupported
[startup] cfgmgr start loading DB
wl: Unsupported
wl: Unsupported
[ndbus][dbus][2017: 0xb6f89910][24.864397][wa][wifihostd][ndbusMainLoop:555]Main thread errno address:0xb6f89de0
[ndbus][dbus][2017: 0xb5eff470][24.873053][wa][wifihostd][thread_entry:463]Child thread errno address:0xb5eff940
initMemoryMngt(): potsNum = 1, adjust_syssemi_size = 692224, adjust_sysheap_size = 614400
common_pools: need 149248 bytes memory
msgbuf_pool_appl: need 117584 bytes memorynr_commands=0,max_links=200
redirect_mode_set 139 mode=2
nr_commands=1,max_links=200
nr_commands=2,max_links=200
nr_commands=3,max_links=200
SipwStartup, fetched maxPrtZips=1
nr_commands=4,max_links=200
=== MsgHandler::initTable : partNumber =3FE48055AAAA ===
enter getCurrentLineMap...
nr_commands=5,max_links=200
GVHW initialization, current onu_maxlines 1 is
nr_commands=6,max_links=200
tpUpdateLocaleProfile: Openning file /usr/etc/alcatel/config/USA_profile.xml ...
tpUpdateLocaleProfile: the size of file /usr/etc/alcatel/config/USA_profile.xml is 30404
tpFile_copyToBuffer: line 83, filename /usr/etc/alcatel/config/USA_profile.xml
[startup] cfgmgr after loading database
start load custom config
Wan System Configuration
=======================================================
model: 1
defaultGwMode: 0
staticDefaultGwItfName:
policyRoutingMode: 1
dnsMode: 1
serialNumber: ALCLXXXXXXXX
oui: 98865D
pppConLostMode: 0
operatorId: BRZL
snInOp60Rule: 0
dhcpIntervalMode: 0
op60OperatorMode: 1
dhcpMaxInitTimer: 0
dhcpMaxSessTimer: 16
upLinkWorkMode: Normal
isBrgSupported: 0
=======================================================
[startup] cfgmgr syncdata2rgwd
[ndbus][dbus][2112: 0xb6f9b000][26.352817][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.lanhostd:FindLanhostEntry, ms=5000 : The name nokia.ndk.lanhostd was not provided by any .service files
enable FixedWanMac Func by App.
[startup] cfgmgr syncdata2rgwd done
sal_netModelInit:L1816 [DEBUG]: to be implemented for brcm
Fill DB initial values.
ERR sal_hgu_init: t=27:89 Invoked
ERR hal_hgu_qos_init:Entering Function
RouteMacMgr pid=2267 create new file /tmp/brcm_route_mac.rm
halDp_initSyncFile pid=2267 fp=0x90b500 fd=7
isIcCreated: 0
icReferenceNum: 0
routedMacNum: 0
ipClassRoutedMacNum: 0
ingressClassIndex.dir: 0
ingressClassIndex.index: 0
ipClassRoutedMacIndexUsed[0]: 0
ipClassRoutedMacIndexUsed[1]: 0
ipClassRoutedMacIndexUsed[2]: 0
Function stl_LogServerObject() is called
Function stl_LogServerObject() is called
Function stl_LogServerObject() is called
Function stl_LogServerObject() is called
Function stl_LogServerObject() is called
Function stl_LogServerObject() is called
Function stl_LogServerObject() is called
InstanceAlias is OFF
ERR: cfgmgr is crashed or blocked.
[1970-01-01 00:00:27]MSG: startupdone.as cfgmgr not ready 2 times
[startup] cfgmgr entering main loop
[ndbus][dbus][2267: 0xb609c000][27.495131][wa][cfgmgr][ndbusMainLoop:555]Main thread errno address:0xb609c4e4
[ndbus][dbus][2267: 0xb586c450][27.498174][wa][cfgmgr][thread_entry:463]Child thread errno address:0xb586c934
[VOIP]enter lantiq_slic_reset
********lantiq_slic_reset() end!************
sh: /sbin/agent: not found
init usb succeed!
[startup stage1_boot 0/78] -> cfgmgr cfg_bootevtmgr
[startup] cfgmgr find_voip_interface out
[ndbus][dbus][2346: 0xb6f82300][27.671713][wa][ramond][ndbusMainLoop:555]Main thread errno address:0xb6f827e4
[ndbus][dbus][2346: 0xb6ab9450][27.676880][wa][ramond][thread_entry:463]Child thread errno address:0xb6ab9934
[startup] cfgmgr VOIP wan found at IP WAN 1.2
[startup] cfgmgr running /sbin/evtmgr -i pon_220_4_1 &
[startup stage1_boot 0/78] <- cfgmgr cfg_bootevtmgr [46ms]
[startup stage1_boot 1/78] -> cfgmgr cfg_bootUplinkMgr
tr181_enabled: TR181 = 1
[startup stage1_boot 1/78] <- cfgmgr cfg_bootUplinkMgr [9ms]
[startup stage1_boot 2/78] -> cfgmgr cfg_bootDeviceInfo
[startup] cfgmgr: InternetGatewayDevice.DeviceInfo.X_ASB_COM_AbstractSerialNumber is ALCLXXXXXXXX
[startup stage1_boot 2/78] <- cfgmgr cfg_bootDeviceInfo [86ms]
[startup stage1_boot 3/78] -> cfgmgr cfg_bootUps
[startup stage1_boot 3/78] <- cfgmgr cfg_bootUps [23ms]
[startup stage1_boot 4/78] -> cfgmgr cfg_bootportMgr
UPS main() is starting........
[startup stage1_boot 4/78] <- cfgmgr cfg_bootportMgr [195ms]
[startup stage1_boot 5/78] -> cfgmgr cfg_bootomciMgr
[startup] evtmgr: starting with voip interface: pon_220_4_1
[startup stage1_boot 5/78] <- cfgmgr cfg_bootomciMgr [93ms]
[startup stage1_boot 6/78] -> cfgmgr cfg_bootcfmMgr
PortMgr main() is starting........
[startup stage1_boot 6/78] <- cfgmgr cfg_bootcfmMgr [17ms]
[startup stage1_boot 7/78] -> cfgmgr cfg_bootPreCfgFlag
[startup stage1_boot 7/78] <- cfgmgr cfg_bootPreCfgFlag [0ms]
[startup stage1_boot 9/78] -> cfgmgr cfg_bootCleanWanData
[startup stage1_boot 9/78] <- cfgmgr cfg_bootCleanWanData [319ms]
[startup stage1_boot 10/78] -> cfgmgr cfg_bootPsemgr
[startup stage1_boot 10/78] <- cfgmgr cfg_bootPsemgr [1ms]
[startup stage1_boot 12/78] -> cfgmgr cfg_bootIGMPJoin
sh: can't create /proc/kum_igmp: nonexistent directory
[startup stage1_boot 12/78] <- cfgmgr cfg_bootIGMPJoin [19ms]
[startup stage1_boot 13/78] -> cfgmgr cfg_bootHguLan
isInitializedCfmTxRx
[12-31 22:00:28][OMCI]isInitializedParser()
cfm_register_callback init succeeded, error = 0x00000000
EthOAM -> ethOAM_RawSock_Init() -> OK
Sorry, rule does not exist.
device br0 already exists; can't create bridge with the same name
enet_ioctl_compat:L2466 SIOCGPONIF
_assign_port_class:L161 set port4 type 2
enslave_port:L294 enslave port4 -> sw0
port_init:L502 port object already initialized: port_0:0
port_init:L502 port object already initialized: port_0:1
libONU_HGUSinglePort() PPTP=All
[12-31 22:00:28][OMCI]********OMCI Config Data Begin****************
[12-31 22:00:28][OMCIport_init:L502 port object already initialized: port_0:2
]****ONU Type : 1
[12-31 22:00:28][OMCI]****max lan num : 4
[12-31 22:00:28][OMCI]****max wifi num: 8
[12-31 22:00:28][OMCI]port_init:L502 port object already initialized: port_0:3
****max wifi id start: 4
[12-31 22:00:29][OMCI]****check wifi state: no
[12-31 22:00:29][demux_on_sw:L239 demux port_0:0: sw0:0
OMCI]****voip stream map port: 13
****wifi port number: 8
[12-31 22:00:29][OMCI]****port 0 config by oenet_create_netdevice:L1691 registered netdev gpondef for port_0:0
mci: 0
[12-31 22:00:29][OMCI]****port 1 config by omci: 1
[12-31 22:00:29][OMCI]****port 2 config by omci: 0
[12-31 22:00:29][OMCI]****port 3 config by omci: 0
[12-31 22:00:29][OMCI]****port 4 config by omci: 0
[12-31 22:00:29][OMCI]****port 5 config by omci: 0
[12-31 22:00:29][OMCI]****port 6 confport_mtu_set:L522 port mtu set port_0:0: mtu:1998
ig by omci: 0port_init:L578 initialized object port_0:0
sw_init:L649 reinitialized sw0
[12-31 22:00:29][OMCI]****port 7 config by omci: 0
[12-31 22:00:29][OMCI]****port 8 config by omci: 0
[12-31 22:00:29][OMCI]****port 9 config by omci: 0
[12-31 22:00:29][OMCI]****port 10 config by omci: 0
[12-31 22:00:29][OMCI]****port 11 config by omci: 0
[1enet_open:L634 gpondef: opened
2-31 22:00:29][OMCI]****dscp to Pbit for untag Config By OMCI: yes
[12-31 22:00:29][OMCI]****support double tag rules us: yes
[12-31 22:00:29][OMCI]****support double tag rules ds: yes
[12-31 22:00:29][OMCI]****support pbit Unmatch Rules: yes
[12-31 22:00:29][OMCI]****support Bcast Unmatch Rules: no
[12-31 22:00:29][OMCI]****support omci manage HGU port: no
[12-31 22:00:29][OMCI]****HGU single port=false
[12-31 22:00:29][OMCI]****support omci replace after ranging : no
[12-31 22:00:29][OMCI]****support Dynamic Tpid : no
[12-31 22:00:29][OMCI]****support Cox : no
[12-31 22:00:29][OMCI]****factory mode: 0
[12-31 22:00:29][OMCI]****support 1588 : no
[12-31 22:00:29][OMCI]****support SyncE : no
[12-31 22:00:29][OMCI]********OMCI Config Data End****************
[12-31 22:00:29][OMCI] user_port class domain
===================================
[12-31 22:00:29][OMCI] 1 ETH HGU
[12-31 22:00:29][OMCI] 2 ETH SFU
[12-31 22:00:29][OMCI] 3 ETH HGU
[12-31 22:00:29][OMCI] 4 ETH HGU
[12-31 22:00:29][OMCI] 1 WIFI HGU
[12-31 22:00:29][OMCI] 2 WIFI HGU
[12-31 22:00:29][OMCI] 3 WIFI HGU
[12-31 22:00:29][OMCI] 4 WIFI HGU
[12-31 22:00:29][OMCI] 5 WIFI HGU
[12-31 22:00:29][OMCI] 6 WIFI HGU
[12-31 22:00:29][OMCI] 7 WIFI HGU
[12-31 22:00:29][OMCI] 8 WIFI HGU
[12-31 22:00:29][OMCI] 13 POTS SFU
[12-31 22:00:29][OMCI] 1 UNKW HGU
[12-31 22:00:29][OMCI]===================================
Set inetnert LED mode is same: 0
phy_test PHY[0] vendor ID: 0xae0251e1
phy_test PHY[1] vendor ID: 0xae0251e1
phy_test PHY[2] vendor ID: 0xae0251e1
phy_test PHY[3] vendor ID: 0xae0251e1
phy: OK
bosa: OK
Please check with PCIe nodes...
0000 14e46846 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e4a8db 26 90000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl
0000 14e46846 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e44360 27 a0000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl
[startup] evtmgr: enter main loop.
wifi: OK
slac: OK
There is 2 USB device on this ONU
There is no USB device inserted !
usb: OK
selftest 5/5 PASS
there is no LED indication for G140WH
phy_test PHY[0] vendor ID: 0xae0251e1
phy_test PHY[1] vendor ID: 0xae0251e1
phy_test PHY[2] vendor ID: 0xae0251e1
phy_test PHY[3] vendor ID: 0xae0251e1
phy: OK
bosa: OK
Please check with PCIe nodes...
0000 14e46846 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e4a8db 26 90000004 0 0 Reset igmp snooping.
0 0 0 0 8000 0 0 0 0 0 0 wl
0000 14e46846 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport
0100 14e44360 27 a0000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl
be ready to create the interface:[gpondef][gpon0][0].
be ready to get the interface:[gpon0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: gpon0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
wifi: OK
slac: OK
There is 2 USB device on this ONU
There is no USB device inserted !
usb: OK
selftest 5/5 PASS
there is no LED indication for G140WH
hal_ont_capability_init max_uni_port 4
hal_ont_capability_init mnemonic buffer G-140W-H
init the rateLimit.
the ontServiceTypeLen:[0].
be ready to ready to read ontServiceType from file:[/configs/ont_service_type].
the current ontServiceType:[HGU].
>>>isBatteryPower(0), isBatteryMissing(0), isBatteryFailure(0), isBatteryLow(0)
Create sipwQ =294921
>>>>>>SAL_ChangeLEDByPowerState BoardType=39
nr_commands=7,max_links=200
nr_commands=8,max_links=200
#sipcommon_root start
nr_commands=9,max_links=200
#InitCommon start
nr_commands=10,max_links=200
nr_commands=11,max_links=200
for Func:[hal_initRateLimit],get the serviceType:[HGU] success.
The ONT Operation_Id is not SFU, needn't init the RateLimit.
libigmp_getPacketIsolation() get packet isolation is 1
[12-31 22:00:29][OMCI]InitPortStream() maxPort=13, enet=12,moca=0
[12-31 22:00:29][OMCI]InitPortStream:: ONU type is HGU
[12-31 22:00:29][OMCI]Use extend flow service
EthManageItf::getInstance: without switch.
be ready to set Priority for Bridge-Interface:[2].
get the port:[2]'s PhyPort:[1] info for Board:[G-140W-H] Success.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:56
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:59
hal_bcm_send_ioctl_cmd :: ioctl failed.
is_xfp: sfp_get_type fail, ret=255
RSSI_lib_get: getSFPPartNumber failed
leave tm_event()
nr_commands=12,max_links=200
be ready to create the interface:[gpondef][iphost0][0].
be ready to get the interface:[iphost0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: iphost0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
be ready to create the interface:[gpon0][gpon0.ani][0].
be ready to get the interface:[gpon0.ani],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: gpon0.ani is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
nr_commands=13,max_links=200
>>>>>>>>printThresh
ponRxHighThresh = -7.000571
ponRxLowThresh = -27.958799
ponTxHighThresh = 6.000031
ponTxLowThresh = -0.499761
ponBiasHighThresh = 70.000000
ponBiasLowThresh = 1.000000
ponTempLowThresh = -5.000000
ponTempHighThresh = 85.000000
ponVolHighThresh = 3.600000
ponVolLowThresh = 3.000000
ponTempLowWarnThresh = 0.000000
ponTempHighWarnThresh = 80.000000
ponVolHighWarnThresh = 3.470000
ponVolLowWarnThresh = 3.130000
ponBiasHighWarnThresh = 0.000000
ponBiasLowWarnThresh = 0.000000
ponRxHighWarnThresh = 0.000000
ponRxlLowWarnThresh = 0.000000
ponTxHighWarnThresh = 0.000000
ponTxLowWarnThresh = 0.000000
[OMCI]HAL_OMCI_FUNC_GET_PONTAG
be ready to create the interface:[gpon0.ani][veip0][0].
be ready to get the interface:[veip0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: veip0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
[sys] yapi registerContainer(cid): 4
PORT_CONFIG_DATA message received
timer created successfully with id 1cfad10
timer created successfully with id 1cfae10
Voice Service PortMgr Created!
timer created successfully with id 1cfb058
timer created successfully with id 1cfb158
Eth Service PortMgr Created!
timer created successfully with id 1cfae20
timer created successfully with id 1cfb3d0
Wifi PortMgr Created!
timer created successfully with id 1cfb168
timer created successfully with id 1cfb650
Usb PortMgr Created!
[12-31 22:00:29][OMCI]reset_all_tsched ...
be ready to create the interface:[gpon0.ani][voip0][0].
nr_commands=14,max_links=200
be ready to get the interface:[voip0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: voip0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
nr_commands=15,max_links=200
#pmc start
#vm start
#linetest start
SLID Enabledcreate the lanPort:[1],portClass:[0]'s default egress_tm:[0].
free one time entry
!!!!!!!!!!!!!!PbitQueueTableMgr @ 112 table_max_id = 16;
ERR: bdmf_new_and_set#501: pbit_to_queue: error:Entry already exists (-7)
OG_DRV_IOC_IOCTL failed, cmd:74
hal_bcm_send_ioctl_cmd :: ioctl failed.
[L2F][ERR] soc_qos_create_pbit_to_queue:37:table id =0 ret=-1
Dec 31 22:00:29 [ERROR] hal_qos_queue.cc:720 table id =0
create the lanPort:[2],portClass:[0]'s default egress_tm:[1].
create the lanPort:[3],portClass:[0]'s default egress_tm:[2].
create the lanPort:[4],portClass:[0]'s default egress_tm:[3].
nr_commands=16,max_links=200
[12-31 22:00:29][OMCI]saveMsgQueueInfo qid=327690,key=0x300004bf
[12-31 22:00:29][OMCI]save new key=0x300004bf, qid=327690 to /tmp/omci.q.log
[12-31 22:00:29][OMCI]thread_id=-1269992368
[12-31 22:00:29][OMCI]saveMsgQueueInfo qid=262152,key=0x10004bf
[12-31 22:00:29][OMCI]save new key=0x10004bf, qid=262152 to /tmp/omci.q.log
libQos_GetOmciQosInfo() get omci qos config is 0
[12-31 22:00:29][OMCI]pid=2476
enter hal_lpd_init
be ready to create the interface:[gpondef][wan0][0].
be ready to get the interface:[wan0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wan0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
wan0: failed insert local address bridge forwarding table
rut_initHguAddLan2Bridge.... - WORKMODE = RGW
Cann't open file
init hal loop detect fail.
[12-31 22:00:30][OMCI]register loop detect callback failed
[12-31 22:00:30][OMCI]evtNotifyHandleFunInit ...
[12-31 22:00:30][OMenet_open:L634 eth0: opened
CI]CfgmgrevtNotifyHandleFunInit ...
libigmp_GetIGMPMaxGroups() get igmp max group is 256
[12-31 22:00:30][OMCI]configMcastFlow ...
lib_get_voipType voiceType 1
lib_get_WifiAsPPTP_Status() get PreferWifiAsPPTP is 1
lib_get_WifiAsDot11_Status() get PreferWifiAsdot11 is 0
[12-31 22:00:30][OMCI]>>>>getSwVerInfo(),imageBank:0,version:3FE48077CGCB30
[12-31 22:00:30][OMCI]special_process_depended_board: call swdl_commit.
be ready to create the interface:[eth0][eth0.0][0].
be ready to get the interface:[eth0.0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: eth0.0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
JON: rut_initHguAddLan2Bridge...., vif_name is: eth0.0
JON: nrut_initHguAddLan2Bridge.... - not adding eth0.0 to bridge
OG_DRV_IOC_READ failed: 4, queueType: 2
ploamTxRx_thread(): ploamTxRx_thread(OG_DRV_IOC_READ:PLOAM) failed -1.
deal with the cmd's result:[0].
enet_open:L634 eth1: opened
rut_initHguAddLan2Bridge...........
sh: /sbin/qtn_upgrade_cli: not found
OG_DRV_IOC_READ failed: 4, queueType: 2
ploamTxRx_thread(): ploamTxRx_thread(OG_DRV_IOC_READ:PLOAM) failed -1.
[12-31 22:00:30][OMCI]OMCI_LIB: OmciMain:: got 'ONU_SWIMAGE_INFO' with value 0xb
[12-31 22:00:30][OMCI]>>>>getSwVerInfo(),imageBank:1,version:3FE48077CGCB30
[12-31 22:00:30][OMCI]OMCI_LIB: Success to create OMCI mib upload share memory, pointer 0xb3cc6000
[12-31 22:00:30][OMCI]checkPonLEDStatus:Fiber disconnected
ds_sec=-1
Inside GatewayUniSupp_1Itf::GatewayUniSupp_1Itf constructor
PWRSHED_ATTR_SET message received!
PwrShed Timers are eth<0> pots<0> ces<0> video<0> xdsl<0> restore<0>, and batteryStatus is <0>
[12-31 22:00:30][OMCI]getLoidAuthInfo() exit @ 0m:30s:575ms, :
[12-31 22:00:30][OMCI] - create_instance_auto() act_plugInUnitType = 48
[12-31 22:00:30][OMCI] - create_instance_auto() act_plugInUnitType = 47
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auenet_open:L634 eth2: opened
to instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
create auto instanmce gateway uni ME succesful
[12-31 22:00:30][OMCI]getLoidAuthInfo() exit @ 0m:30s:625ms, :
AnigSupp_1 creat
[12-31 22:00:30][OMCI]saveMsgQueueInfo qid=458766,key=0x10001
[12-31 22:00:30][OMCI]save new key=0x10001, qid=458766 to /tmp/omci.q.log
Mib Upload for GatewayUniSupp_1Itf ME
be ready to create the interface:[eth2][eth2.0][0].
be ready to get the interface:[eth2.0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: eth2.0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
JON: rut_initHguAddLan2Bridge...., vif_name is: eth2.0
JON: nrut_initHguAddLan2Bridge.... - not adding eth2.0 to bridge
deal with the cmd's result:[0].
enet_open:L634 eth3: opened
be ready to create the interface:[eth3][eth3.0][0].
be ready to get the interface:[eth3.0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: eth3.0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
JON: rut_initHguAddLan2Bridge...., vif_name is: eth3.0
JON: nrut_initHguAddLan2Bridge.... - not adding eth3.0 to bridge
[12-31 22:00:30][OMCI]special_process_depended_board: call swdl_commit.
deal with the cmd's result:[0].
Sorry, rule does not exist.
Sorry, rule does not exist.
sh: /sbin/qtn_upgrade_cli: not found
[12-31 22:00:30][OMCI]OMCI_LIB: Got swImageInfo = b, standby = 1
[12-31 22:00:30][OMCI]OMCI_LIB: Got swImageInfo = 0, standby = 3
[12-31 22:00:30][OMCI]OMCI_LIB: Got swImageInfo = 0, standby = 5
get slid pwd: 44454641554c54000000
setOmciIK pwd: len=36
44 45 46 41 55 4c 54 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00
setOmciIK sn: len=8
41 4c 43 4c fb df 5d 17
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
sed: /etc/dhcpsnoop.conf: No such file or directory
sed: /etc/dhcpsnoop.conf: No such file or directory
[ndbus][dbus][2112: 0xb6f9b000][31.242379][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadHostsCache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[startup] cfgmgr insertModuleInfo
insmod: can't read '/lib/modules/4.1.45/xt_limit.ko': No such file or directory
[startup] cfgmgr insertModuleInfo done
[startup] cfgmgr rut_setupFireWallChain
[startup] iptables-restore: [SETUP_CHAIN] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_1
[Minging]remove /tmp/iptablesV4_2267_1
[iptables-restore] restore /tmp/iptablesV4_2267_1(63 entries) took 0.40s, totalCmd took 0.58.
[startup] cfgmgr rut_setupIpv4DosProtection
[startup] iptables-restore: [DOS_PROT_TCP] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_2
[Minging]remove /tmp/iptablesV4_2267_2
[iptables-restore] restore /tmp/iptablesV4_2267_2(6 entries) took 0.293s, totalCmd took 0.351.
[startup] iptables-restore: [SUB_DOS_PROT] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_3
[Minging]remove /tmp/iptablesV4_2267_3
wl: Not up
sh: -60: unknown operand
[iptables-restore] restore /tmp/iptablesV4_2267_3(15 entries) took 0.39s, totalCmd took 0.390.
[startup] iptables-restore: [SUB_DOS_PROT] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_4
[Minging]remove /tmp/iptablesV4_2267_4
[iptables-restore] restore /tmp/iptablesV4_2267_4(7 entries) took 0.39s, totalCmd took 0.429.
iptables v1.4.16.3: Couldn't find match `unclean'
Try `iptables -h' or 'iptables --help' for more information.
[startup] cfgmgr rut_setupIpv4DosProtection done
[Minging]remove /tmp/iptablesV6_2267_1
[iptables-restore-v6] restore /tmp/iptablesV6_2267_1(77 entries) took 0.143s, totalCmd took 0.784.
[startup] cfgmgr rut_setupFireWallChain done
iptables: No chain/target/match by that name.
[startup] iptables-restore: [NAT] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_5
[Minging]remove /tmp/iptablesV4_2267_5
[iptables-restore] restore /tmp/iptablesV4_2267_5(28 entries) took 0.34s, totalCmd took 1.51.
[startup] cfgmgr rut_InitIptablesNat done
[startup] cfgmgr rut_setupFixedHostServiceRulesForFilter
UserAgentPort=5060 liuchi
localPortMin=22456 localPortMax=22584 liuchi
[startup] iptables-restore: [FWLEVEL] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_6
[Minging]remove /tmp/iptablesV4_2267_6
[iptables-restore] restore /tmp/iptablesV4_2267_6(44 entries) took 0.79s, totalCmd took 1.272.
[Minging]remove /tmp/iptablesV6_2267_2
[iptables-restore-v6] restore /tmp/iptablesV6_2267_2(50 entries) took 0.144s, totalCmd took 1.416.
[startup] cfgmgr rut_setupFixedHostServiceRulesForFilter done (non VFSP)
Function rutIpt_portalLoidWeb() is calledDHCPDRV Entering Callback function!!!
[Dec 31 22:00:32] radvd: version 1.6 started
[Dec 31 22:00:32] radvd: interface br0 is not RUNNING
[Dec 31 22:00:32] radvd: interface br0 does not exist
[Dec 31 22:00:32] radvd: error parsing or activating the config file: /etc/radvd.conf
iptables v1.4.16.3: Couldn't find match `conntract'
Try `iptables -h' or 'iptables --help' for more information.
ip6tables v1.4.16.3: Couldn't find match `conntract'
Try `ip6tables -h' or 'ip6tables --help' for more information.
iptables v1.4.16.3: Couldn't find match `conntract'
Try `iptables -h' or 'iptables --help' for more information.
ip6tables v1.4.16.3: Couldn't find match `conntract'
Try `ip6tables -h' or 'ip6tables --help' for more information.
be ready to set the WorkMode:[RGW][].
[startup stage1_boot 13/78] <- cfgmgr cfg_bootHguLan [5312ms]
[startup stage1_boot 14/78] -> cfgmgr cfg_bootWan
enter rgw_processWanChangeSignal with buf=0x92bc64 size=912
RPRT wapp_sendWanInfoToWand opcode=1
RPRT rut_addXCTCOMNameChange wanObj=0xbed0fc34
RPRT rutLan_addDdnsInstance connType=ip
RPRT rutWan_SetRemoteSftp isInternetWan=1 Obj=0xbed0fc34 newConn=1
RPRT rts_WanIpConnObject exit currObj=(nil) newObj=0xbed0fc34 flag=0x0
enter rgw_processWanChangeSignal with buf=0x92c1d4 size=912
RPRT wapp_sendWanInfoToWand opcode=1
RPRT rut_addXCTCOMNameChange wanObj=0xbed0fc34
RPRT rutLan_addDdnsInstance connType=ip
RPRT rts_WanIpConnObject exit currObj=(nil) newObj=0xbed0fc34 flag=0x0
[startup stage1_boot 14/78] <- cfgmgr cfg_bootWan [1175ms]
[startup stage1_boot 15/78] -> cfgmgr cfg_bootDnsProxy
[ndbus][dbus][2112: 0xb6f9b000][34.989994][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][34.999949][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.011086][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.021543][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.031376][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.041953][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.052277][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.063285][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnspigmpdrv k_igmp_ioctl_set_port_type:571 Eth_1 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpbl hal_kernel_create_vlan_entry_id:1683 WDS_1 create entryId(4294967295) begin!
igmpbl hal_kernel_create_vlan_entry_id:1688 WDS_1 create entryId(0) successfully!
igmpbl hal_kernel_create_vlan_entry_id:1677 WDS_2 find shared entryId(0)!
igmpbl hal_kernel_create_vlan_entry_id:1677 WDS_3 find shared entryId(0)!
igmpbl hal_kernel_create_vlan_entry_id:1677 WDS_4 find shared entryId(0)!
igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_1 create entryId(4294967295) begin!
igmpbl hal_kernel_create_vlan_entry_id:1688 Eth_1 create entryId(1) successfully!
roxy was not igmpdrv k_igmp_ioctl_set_port_type:571 Eth_2 port_type =0
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_2 create entryId(4294967295) begin!
provided by aigmpbl hal_kernel_create_vlan_entry_id:1688 Eth_2 create entryId(2) successfully!
ny .service figmpdrv k_igmp_ioctl_set_port_type:571 Eth_3 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
iles
[ndbus]igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_3 create entryId(4294967295) begin!
[dbus][2112: igmpbl hal_kernel_create_vlan_entry_id:1688 Eth_3 create entryId(3) successfully!
0xb6f9b000][3igmpdrv k_igmp_ioctl_set_port_type:571 Eth_4 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
5.074833][fa]igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_4 create entryId(4294967295) begin!
[rgwd][ndbusTigmpbl hal_kernel_create_vlan_entry_id:1688 Eth_4 create entryId(4) successfully!
ransmit:104]aigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_1 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
n error occurigmpbl hal_kernel_create_vlan_entry_id:1683 Wifi_1 create entryId(4294967295) begin!
igmpbl hal_kernel_create_vlan_entry_id:1688 Wifi_1 create entryId(5) successfully!
red on (0x928igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_2 port_type =1
968) when nokigmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
ia.ndk.dnsproigmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_2 find shared entryId(5)!
xy.itf.api:Loigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_3 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
adD2Acache, migmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_3 find shared entryId(5)!
s=5000 : The igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_4 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
name nokia.ndigmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_4 find shared entryId(5)!
k.dnsproxy waigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_5 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
s not provideigmpbl hal_kernel_create_vlan_entry_id:1683 Wifi_5 create entryId(4294967295) begin!
d by any .serigmpbl hal_kernel_create_vlan_entry_id:1688 Wifi_5 create entryId(6) successfully!
vice files
[igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_6 port_type =1
ndbus][dbus][igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
2112: 0xb6f9bigmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
igmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_6 find shared entryId(6)!
000][35.08573igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_7 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
igmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
7][fa][rgwd][igmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_7 find shared entryId(6)!
ndbusTransmitigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_8 port_type =1
igmpapi IgmpApiSetPortType:1644
Set WIFI backhual ports type
:104]an errorigmpapi IgmpSetWifiBackhaulConfigration:1566
Regist LogPort(WDS_1) exist and bypass the following setting.
occurred on igmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_8 find shared entryId(6)!
(0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[ndbus][dbus][2112: 0xb6f9b000][35.097224][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files
[startup stage1_boot 15/78] <- cfgmgr cfg_bootDnsProxy [169ms]
[startup stage1_boot 16/78] -> cfgmgr cfg_bootIGMP
igmpIntLanPortType begin!
igmpIntLanPortType isSupportLan(1), lanPortNum(4)!
igmpIsLanHguPort: lanIndex(0), isHguType(1)
getSharedMemory failed
igmpInitLanPortType: set portClass(0), userPort(1), portType(1)
igmpIsLanHguPort: lanIndex(1), isHguType(0)
dnsproxy is started with pid=2975
igmpInitLanPortType: set portClass(0), userPort(2), portType(0)
igmpIsLanHguPort: lanIndex(2), isHguType(1)
igmpInitLanPortType: set portClass(0), userPort(3), portType(1)
igmpIsLanHguPort: lanIndex(3), isHguType(1)
[ndbus][dbus][2975: 0xb6fadc20][35.291022][wa][dnsproxy][ndbusMainLoop:555]Main thread errno address:0xb6fae0f0
[ndbus][dbus][2975: 0xb6836450][35.308049][wa][dnsproxy][thread_entry:463]Child thread errno address:0xb6836920
igmpInitLanPortType: set portClass(0), userPort(4), portType(1)
igmpInitWifiPortType begin
igmpInitWifiPort isQtnWifiFlag(0), user_port(1) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(2) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(3) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(4) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(5) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(6) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(7) port_domain(HGU)
igmpInitWifiPort isQtnWifiFlag(0), user_port(8) port_domain(HGU)
rutIgmp_init()
rutMld_startMldProxy
rutMld_stopMldProxy
killall: mld: no process killed
No need to set wan info, wanIfName=
[startup stage1_boot 16/78] <- cfgmgr cfg_bootIGMP [509ms]
[startup on_idle 18/78] -> cfgmgr cfg_bootXptablesRule
[startup] cfgmgr insertModuleInfo
insmod: can't read '/lib/modules/4.1.45/xt_limit.ko': No such file or directory
[startup] cfgmgr insertModuleInfo done
[startup] cfgmgr rut_setupDropAckRule
[startup] iptables-restore: [DROP_ACK] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_7
[Minging]remove /tmp/iptablesV4_2267_7
set obc limitation successful[iptables-restore] restore /tmp/iptablesV4_2267_7(20 entries) took 0.38s, totalCmd took 2.692.
[startup] cfgmgr rut_setupDropAckRule done
[startup] cfgmgr rutIpt_initIpFilterOutChain
[startup] iptables-restore: [IP_FILTER] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_8
[Minging]remove /tmp/iptablesV4_2267_8
[iptables-restore] restore /tmp/iptablesV4_2267_8(25 entries) took 0.35s, totalCmd took 2.913.
[startup] cfgmgr rutIpt_initIpFilterOutChain done
[startup on_idle 18/78] <- cfgmgr cfg_bootXptablesRule [637ms]
set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerUpper=<-7> success!
UplinkMgrCfg:
WorkMode: 0
DetectMethod: 0
VFSPUplinkMgrTrack:
Interval: 5
DataBackupMode: 0
SwitchToMobileFlag: 0
MobileDisconnectIdleTime: 600
IsActiveLanHostAvailable_m: 0
ICMPQueryInterval: 4
Gateway:
DNSQueryInterval: 4
DNSQueryUrl:
DataWanToMobileDelayTime: 0
DataMobileToWanDelayTime: 0
[1970-01-01 00:00:36]MSG: cfgmgr is working well
[ndbus][dbus][2375: 0xb6fce980][36.339611][wa][uplinkmgr][ndbusMainLoop:555]Main thread errno address:0xb6fcee64
[ndbus][dbus][2375: 0xb526c450][36.342514][wa][uplinkmgr][thread_entry:463]Child thread errno address:0xb526c934
set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerUpperDec=<0> success!
set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerLower=<-27> success!
set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerLowerDec=<-95> success!
the ontServiceTypeLen:[3].
for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success.
The ONT Operation_Id is not SFU, needn't control wan0's ratelimit.
the ontServiceTypeLen:[3].
for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success.
The ONT Operation_Id is not SFU, needn't control wan0's ratelimit.
the ontServiceTypeLen:[3].
for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success.
The ONT Operation_Id is not SFU, needn't control wan0's ratelimit.
the ontServiceTypeLen:[3].
for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success.
The ONT Operation_Id is not SFU, needn't control wan0's ratelimit.
[12-31 22:00:36][OMCI]configUniAction(portId=e01,tag=2) stream_ptr is NULL
[12-31 22:00:36][OMCI]configUniAction(portId=e01,tag=2) stream_ptr is NULL
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
OG_DRV_IOC_IOCTL failed, cmd:60
hal_bcm_send_ioctl_cmd :: ioctl failed.
the ontServiceTypeLen:[0].
be ready to ready to read ontServiceType from file:[/configs/ont_service_type].
the current ontServiceType:[HGU].
for Func:[hal_eth_set_ont_aggregation_mode],get the serviceType:[HGU] success.
The ONT Operation_Id is not SFU, not need enable/disable mac learning
WARNING: insmod usbserial.ko
WARNING: insmod usb_wwan.ko
WARNING: insmod option.ko
[1970-01-01 00:00:36]MSG: tigger /usr/exe/socmonitor.as ...
[1970-01-01 00:00:36]MSG: startupdone helper triggered
[1970-01-01 00:00:36]MSG: SoC temperature is 50 @ 1969-12-31 22:00:36
[startup on_idle 19/78] -> cfgmgr cfg_bootSsh
superd running time is 26.
[startup on_idle 19/78] <- cfgmgr cfg_bootSsh [76ms]
Starting Dropbear SSH server: dropbear.
[startup on_idle 20/78] -> cfgmgr cfg_bootWlan
cmd = wl -i wl0 channels
cmd = wl -i wl0 channels
cmd = wl -i wl1 channels
create hide ssid
Setting SSID: "HdTbB5+T"
create hide ssid
Setting SSID: "3Y8YwviN"
be ready to create the interface:[wl0][wl0.v0][0].
be ready to get the interface:[wl0.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl0.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl0
get_port_by_if_name:L464 is not an enet dev wl0
get_port_by_if_name:L464 is not an enet dev wl0
be ready to create the interface:[wl0.1][wl0.1.v0][0].
be ready to get the interface:[wl0.1.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl0.1.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl0.1
get_port_by_if_name:L464 is not an enet dev wl0.1
get_port_by_if_name:L464 is not an enet dev wl0.1
be ready to create the interface:[wl0.2][wl0.2.v0][0].
be ready to get the interface:[wl0.2.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl0.2.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl0.2
get_port_by_if_name:L464 is not an enet dev wl0.2
get_port_by_if_name:L464 is not an enet dev wl0.2
be ready to create the interface:[wl0.3][wl0.3.v0][0].
be ready to get the interface:[wl0.3.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl0.3.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl0.3
get_port_by_if_name:L464 is not an enet dev wl0.3
get_port_by_if_name:L464 is not an enet dev wl0.3
be ready to create the interface:[wl0.4][wl0.4.v0][0].
be ready to get the interface:[wl0.4.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl0.4.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl0.4
get_port_by_if_name:L464 is not an enet dev wl0.4
get_port_by_if_name:L464 is not an enet dev wl0.4
get_port_by_if_name:L464 is not an enet dev wl0.4
deal with the cmd's result:[0].
deal with the cmd's result:[0].
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
be ready to create the interface:[wl1][wl1.v0][0].
be ready to get the interface:[wl1.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl1.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl1
get_port_by_if_name:L464 is not an enet dev wl1
get_port_by_if_name:L464 is not an enet dev wl1
be ready to create the interface:[wl1.1][wl1.1.v0][0].
be ready to get the interface:[wl1.1.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl1.1.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl1.1
get_port_by_if_name:L464 is not an enet dev wl1.1
get_port_by_if_name:L464 is not an enet dev wl1.1
be ready to create the interface:[wl1.2][wl1.2.v0][0].
be ready to get the interface:[wl1.2.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl1.2.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
nr_commands=17,max_links=200
get_port_by_if_name:L464 is not an enet dev wl1.2
get_port_by_if_name:L464 is not an enet dev wl1.2
get_port_by_if_name:L464 is not an enet dev wl1.2
be ready to create the interface:[wl1.3][wl1.3.v0][0].
be ready to get the interface:[wl1.3.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl1.3.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl1.3
get_port_by_if_name:L464 is not an enet dev wl1.3
get_port_by_if_name:L464 is not an enet dev wl1.3
get_port_by_if_name:L464 is not an enet dev wl1
get_port_by_if_name:L464 is not an enet dev wl1.1
get_port_by_if_name:L464 is not an enet dev wl1.2
get_port_by_if_name:L464 is not an enet dev wl1.3
be ready to create the interface:[wl1.4][wl1.4.v0][0].
be ready to get the interface:[wl1.4.v0],wanNum:[0]'s macAddr.
[MAC_ASSIGN]get_assigned_mac name: wl1.4.v0 is not wan conn
[MAC_ASSIGN]new if, will assign mac by vlanctl.
rut_initWLanBridge.......
get_port_by_if_name:L464 is not an enet dev wl1.4
get_port_by_if_name:L464 is not an enet dev wl1.4
get_port_by_if_name:L464 is not an enet dev wl1.4
deal with the cmd's result:[0].
deal with the cmd's result:[0].
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
sh: /sbin/wslmgr: not found
[startup on_idle 20/78] <- cfgmgr cfg_bootWlan [4111ms]
[get_region] Region Code: br @ CTY br
get_port_by_if_name:L464 is not an enet dev wl0
get_port_by_if_name:L464 is not an enet dev wl0.1
wl: Not up
sh: -60: unknown operand
get_port_by_if_name:L464 is not an enet dev wl0.2
get_port_by_if_name:L464 is not an enet dev wl0.3
get_port_by_if_name:L464 is not an enet dev wl1
get_port_by_if_name:L464 is not an enet dev wl1
[startup on_idle 21/78] -> cfgmgr cfg_bootSetNumEntry
[startup on_idle 21/78] <- cfgmgr cfg_bootSetNumEntry [26ms]
get_port_by_if_name:L464 is not an enet dev wl1
[startup on_idle 22/78] -> cfgmgr cfg_bootLanPort
phy_set_EthMode: pid=2267 ppid=1 phyid=0 speed=4 mode=3 status=0 ethmode=0x0
phy_hal_set_mode: pid=2267 ppid=1 phyid=0 mode=0x0
phy_set_EthMode: pid=2267 ppid=1 phyid=0 speed=3 mode=2 status=0 ethmode=0x1FF0A
phy_hal_set_mode: pid=2267 ppid=1 phyid=0 mode=0x1FF0A
phy_set_EthMode: pid=2267 ppid=1 phyid=2 speed=4 mode=3 status=0 ethmode=0x0
phy_hal_set_mode: pid=2267 ppid=1 phyid=2 mode=0x0
get_port_by_if_name:L464 is not an enet dev wl0
get_port_by_if_name:L464 is not an enet dev wl0
phy_set_EthMode: pid=2267 ppid=1 phyid=2 speed=3 mode=2 status=0 ethmode=0x1FF0A
phy_hal_set_mode: pid=2267 ppid=1 phyid=2 mode=0x1FF0A
phy_set_EthMode: pid=2267 ppid=1 phyid=3 speed=4 mode=3 status=0 ethmode=0x0
phy_hal_set_mode: pid=2267 ppid=1 phyid=3 mode=0x0
phy_set_EthMode: pid=2267 ppid=1 phyid=3 speed=3 mode=2 status=0 ethmode=0x1FF0A
phy_hal_set_mode: pid=2267 ppid=1 phyid=3 mode=0x1FF0A
[startup on_idle 22/78] <- cfgmgr cfg_bootLanPort [115ms]
[startup on_idle 23/78] -> cfgmgr cfg_bootPowerManagement
[startup on_idle 23/78] <- cfgmgr cfg_bootPowerManagement [0ms]
Chanspec set to 0x1001
wl: Not In Range
AI CLI*3760> Wed Dec 31 22:00:43 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
AI CLI*3812> Wed Dec 31 22:00:43 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
Setting SSID: "ALHN-XXXX"
[startup on_idle 24/78] -> cfgmgr cfg_bootLanLoopbackDet
enter hal_lpd_init
Cann't open file
hal_lpd_init failed
enter hal_lpd_set_port_info
enter hal_lpd_set_port_info
enter hal_lpd_set_port_info
enter hal_lpd_set_port_info
[startup on_idle 24/78] <- cfgmgr cfg_bootLanLoopbackDet [204ms]
[startup on_idle 25/78] -> cfgmgr cfg_bootLTEMgr
[startup on_idle 25/78] <- cfgmgr cfg_bootLTEMgr [2ms]
get_port_by_if_name:L464 is not an enet dev wl1
get_port_by_if_name:L464 is not an enet dev wl1
[startup on_idle 26/78] -> cfgmgr cfg_bootLog
stopping syslog klogd syslogd rsyslogd
Chanspec set to 0xe02a
Chanspec set to 0xe02a
AI CLI*3995> Wed Dec 31 22:00:44 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
restarting syslog
wl: Unsupported
mkfifo: /tmp/event_messages: File exists
rsyslog start TZ ev /etc/localtime
Generating rsyslog.conf
rsyslogd starting
wl: Not In Range
[startup on_idle 26/78] <- cfgmgr cfg_bootLog [319ms]
AI CLI*4063> Wed Dec 31 22:00:45 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
Setting SSID: "ALHN-XXXX"
[startup on_idle 27/78] -> cfgmgr cfg_bootWanLanAccess
[startup] iptables-restore: [IPFILTER] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_9
[Minging]remove /tmp/iptablesV4_2267_9
[iptables-restore] restore /tmp/iptablesV4_2267_9(8 entries) took 0.63s, totalCmd took 3.35.
[Minging]remove /tmp/iptablesV6_2267_3
[iptables-restore-v6] restore /tmp/iptablesV6_2267_3(7 entries) took 0.142s, totalCmd took 3.177.
conntrack v1.4.1 (conntrack-tools): 0 flow entries have been deleted.
[startup] iptables-restore: [LAN_ACCESS] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_10
[Minging]remove /tmp/iptablesV4_2267_10
[iptables-restore] restore /tmp/iptablesV4_2267_10(7 entries) took 0.71s, totalCmd took 3.272.
[Minging]remove /tmp/iptablesV6_2267_4
[iptables-restore-v6] restore /tmp/iptablesV6_2267_4(6 entries) took 0.112s, totalCmd took 3.384.
[startup on_idle 27/78] <- cfgmgr cfg_bootWanLanAccess [313ms]
config hide ssid
72:D9:AE:XX:XX:XX
get_port_by_if_name:L464 is not an enet dev wl1.4
/usr/exe/mesh_wds_hidessid.sh: line 140: dhd: not found
[startup on_idle 29/78] -> cfgmgr cfg_bootDCMgr
[startup on_idle 29/78] <- cfgmgr cfg_bootDCMgr [0ms]
get_port_by_if_name:L464 is not an enet dev wl1.4
get_port_by_if_name:L464 is not an enet dev wl1.4
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
Sorry, rule does not exist.
config hide ssid
6A:D9:AE:XX:XX:XX
/usr/exe/mesh_wds_hidessid.sh: line 140: dhd: not found
get_port_by_if_name:L464 is not an enet dev wl0.4
get_port_by_if_name:L464 is not an enet dev wl0.4
[startup on_idle 30/78] -> cfgmgr cfg_bootArpWan
wanlived starting with pid 4331
wand starting ... interval = 60
net.ipv4.ping_group_range = 0 0
[startup on_idle 30/78] <- cfgmgr cfg_bootArpWan [119ms]
led_mode=0 is_intercept_enabled=0
add new wan info 10101,interface=pon_210_0_1,ip=
add new wan info 10201,interface=pon_220_4_1,ip=
[ndbus][dbus][4334: 0xb6f7b8a0][47.748509][wa][wanlived][ndbusMainLoop:555]Main thread errno address:0xb6f7bd70
[ndbus][dbus][4334: 0xb67f0450][47.751889][wa][wanlived][thread_entry:463]Child thread errno address:0xb67f0920
nas_nsb_log_init
Setup RRB socket, interface name=br0
AI CLI*4351> Wed Dec 31 22:00:47 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
sh: syntax error: unterminated quoted string
[startup on_idle 31/78] -> cfgmgr cfg_bootSched
[startup on_idle 31/78] <- cfgmgr cfg_bootSched [24ms]
sed: /var/spool/cron/crontabs/root: No such file or directory
AI CLI*3760> Wed Dec 31 22:00:48 | INFO | aicli.c | send_msg:89 | timeout and retry #1
sed -i -e '/\/sbin\/wifi/d' -e '/accesspolicy/d' -e '/profilepolicy/d' /var/spool/cron/crontabs/root
sed: /var/spool/cron/crontabs/ONTUSER: No such file or directory
sed -i -e '/\/sbin\/wifi/d' -e '/accesspolicy/d' -e '/profilepolicy/d' /var/spool/cron/crontabs/ONTUSER
sh: you need to specify whom to kill
AI CLI*3812> Wed Dec 31 22:00:48 | INFO | aicli.c | send_msg:89 | timeout and retry #1
[startup on_idle 32/78] -> cfgmgr cfg_bootUrlfilter
[startup on_idle 32/78] <- cfgmgr cfg_bootUrlfilter [29ms]
igmpbl get_intf_by_dev_name: wl1.4.v0 failed.
igmpbl get_roaming_update_info faild.
igmpbl McastRoamingHandle faild.
[startup on_idle 33/78] -> cfgmgr cfg_bootMWband
[startup on_idle 33/78] <- cfgmgr cfg_bootMWband [13ms]
igmpbl McastRoamingHandle faild.
AI CLI*3995> Wed Dec 31 22:00:49 | INFO | aicli.c | send_msg:89 | timeout and retry #1
[startup on_idle 34/78] -> cfgmgr cfg_bootCTUPnP
[startup on_idle 34/78] <- cfgmgr cfg_bootCTUPnP [0ms]
AI CLI*4063> Wed Dec 31 22:00:50 | INFO | aicli.c | send_msg:89 | timeout and retry #1
[startup on_idle 35/78] -> cfgmgr cfg_bootMediaServe
[startup on_idle 35/78] <- cfgmgr cfg_bootMediaServe [0ms]
[startup on_idle 36/78] -> cfgmgr cfg_bootStunnel
[startup on_idle 36/78] <- cfgmgr cfg_bootStunnel [58ms]
set 24g phy_ed_thresh to -60
[startup on_idle 37/78] -> cfgmgr cfg_bootCopyCert
[startup on_idle 37/78] <- cfgmgr cfg_bootCopyCert [0ms]
[startup on_idle 38/78] -> cfgmgr cfg_bootUser
[startup on_idle 38/78] <- cfgmgr cfg_bootUser [592ms]
AI CLI*4351> Wed Dec 31 22:00:52 | INFO | aicli.c | send_msg:89 | timeout and retry #1
AI CLI*3760> Wed Dec 31 22:00:53 | INFO | aicli.c | send_msg:89 | timeout and retry #2
[startup on_idle 39/78] -> cfgmgr cfg_bootFtp
killall: utelnetd: no process killed
iptables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
AI CLI*3812> Wed Dec 31 22:00:53 | INFO | aicli.c | send_msg:89 | timeout and retry #2
ip6tables: No chain/target/match by that name.
telnetd: starting
max_connection=8 port: 23; interface: any; login program: /bin/login
killall: proftpd: no process killed
[startup on_idle 39/78] <- cfgmgr cfg_bootFtp [435ms]
[startup on_idle 40/78] -> cfgmgr cfg_bootNtp
rm: can't remove '/configs/etc/TZ': No such file or directory
rm: can't remove '/configs/etc/TZ': No such file or directory
[startup on_idle 40/78] <- cfgmgr cfg_bootNtp [153ms]
AI CLI*3995> Wed Dec 31 22:00:54 | INFO | aicli.c | send_msg:89 | timeout and retry #2
[startup on_idle 41/78] -> cfgmgr cfg_bootUsb
[startup on_idle 41/78] <- cfgmgr cfg_bootUsb [0ms]
AI CLI*4063> Wed Dec 31 22:00:55 | INFO | aicli.c | send_msg:89 | timeout and retry #2
[startup on_idle 42/78] -> cfgmgr cfg_bootstaticRoute
[startup on_idle 42/78] <- cfgmgr cfg_bootstaticRoute [27ms]
igmpbl McastRoamingHandle faild.
[startup on_idle 43/78] -> cfgmgr cfg_bootMiniOLTTest
Function rts_MinioltTestObject() is called
[startup on_idle 43/78] <- cfgmgr cfg_bootMiniOLTTest [0ms]
[startup on_idle 44/78] -> cfgmgr cfg_bootVPN
[startup on_idle 44/78] <- cfgmgr cfg_bootVPN [0ms]
[startup on_idle 45/78] -> cfgmgr cfg_bootRfVideo
[startup on_idle 45/78] <- cfgmgr cfg_bootRfVideo [0ms]
[startup on_idle 46/78] -> cfgmgr cfg_PowerLed
[startup on_idle 46/78] <- cfgmgr cfg_PowerLed [0ms]
get_port_by_if_name:L464 is not an enet dev wl0
AI CLI*4351> Wed Dec 31 22:00:57 | INFO | aicli.c | send_msg:89 | timeout and retry #2
[startup on_idle 47/78] -> cfgmgr cfg_bootTunnel
[startup on_idle 47/78] <- cfgmgr cfg_bootTunnel [8ms]
AI CLI*3760> Wed Dec 31 22:00:58 | INFO | aicli.c | send_msg:89 | timeout and retry #3
AI CLI*3812> Wed Dec 31 22:00:58 | INFO | aicli.c | send_msg:89 | timeout and retry #3
[startup on_idle 48/78] -> cfgmgr cfg_bootAlg
[startup on_idle 48/78] <- cfgmgr cfg_bootAlg [446ms]
get_port_by_if_name:L464 is not an enet dev wl1
[startup on_idle 49/78] -> cfgmgr cfg_bootBDEMgr
[startup on_idle 49/78] <- cfgmgr cfg_bootBDEMgr [0ms]
AI CLI*3995> Wed Dec 31 22:00:59 | INFO | aicli.c | send_msg:89 | timeout and retry #3
[startup on_idle 50/78] -> cfgmgr cfg_diagnostic
AI CLI*4063> Wed Dec 31 22:01:00 | INFO | aicli.c | send_msg:89 | timeout and retry #3
killall: udpEchod: no process killed
[startup on_idle 50/78] <- cfgmgr cfg_diagnostic [190ms]
[startup on_idle 51/78] -> cfgmgr cfg_tracediag
[startup on_idle 51/78] <- cfgmgr cfg_tracediag [4ms]
get_port_by_if_name:L464 is not an enet dev wl1.4
[startup on_idle 52/78] -> cfgmgr cfg_auto_commit
[startup on_idle 52/78] <- cfgmgr cfg_auto_commit [0ms]
[startup on_idle 53/78] -> cfgmgr cfg_ippingdiag
[startup on_idle 53/78] <- cfgmgr cfg_ippingdiag [4ms]
get_port_by_if_name:L464 is not an enet dev wl0.4
[startup on_idle 54/78] -> cfgmgr cfg_bootSecurity
[startup on_idle 54/78] <- cfgmgr cfg_bootSecurity [92ms]
AI CLI*4351> Wed Dec 31 22:01:02 | INFO | aicli.c | send_msg:89 | timeout and retry #3
[startup on_idle 55/78] -> cfgmgr cfg_bootParentalCtl
[startup on_idle 55/78] <- cfgmgr cfg_bootParentalCtl [0ms]
AI CLI*3760> Wed Dec 31 22:01:03 | INFO | aicli.c | send_msg:89 | timeout and retry #4
AI CLI*3812> Wed Dec 31 22:01:03 | INFO | aicli.c | send_msg:89 | timeout and retry #4
[startup on_idle 56/78] -> cfgmgr cfg_bootMeshCtl
iptables: Chain already exists.
[startup on_idle 56/78] <- cfgmgr cfg_bootMeshCtl [106ms]
script_backhaulselector: Enter startup backhaul selector script. Include adapt 2.4g/5g inteface version
DDM pid's Count [1]
DDM_MAIN
initDdmDefaultConfig 23
initDdmDefaultConfig 29
initDdmDefaultConfig 31
[startup on_idle 57/78] -> cfgmgr cfg_WifiCtl
initDdmDefaultConfig 67
initDdmDefaultConfig 70
initDdmDefaultConfig 72
initDdmDefaultConfig 74
initDdmDefaultConfig 76
initDdmDefaultConfig 86
initDdmDefaultConfig 95
initDdmDefaultConfig 97
initDdmDefaultConfig 99
initDdmDefaultConfig 101
initDdmDefaultConfig 104
initDdmDefaultConfig 106
reading config /configs/whw/ddm_config.cfg
DDM_LOG
sed: /etc/dhcpsnoop.conf: No such file or directory
[startup on_idle 57/78] <- cfgmgr cfg_WifiCtl [42ms]
[startup on_idle 58/78] -> cfgmgr cfg_bootUPnPCtrlPt
[startup on_idle 58/78] <- cfgmgr cfg_bootUPnPCtrlPt [67ms]
AI CLI*3995> Wed Dec 31 22:01:04 | INFO | aicli.c | send_msg:89 | timeout and retry #4
[startup on_idle 59/78] -> cfgmgr cfg_bootP2P
[startup on_idle 59/78] <- cfgmgr cfg_bootP2P [0ms]
AI CLI*4063> Wed Dec 31 22:01:05 | INFO | aicli.c | send_msg:89 | timeout and retry #4
[startup on_idle 60/78] -> cfgmgr cfg_bootTransceiver
[startup on_idle 60/78] <- cfgmgr cfg_bootTransceiver [0ms]
[startup on_idle 61/78] -> cfgmgr cfg_bootTempeSensor
[startup on_idle 61/78] <- cfgmgr cfg_bootTempeSensor [0ms]
[startup on_idle 62/78] -> cfgmgr cfg_WiFiUSBPwrMngt
[startup on_idle 62/78] <- cfgmgr cfg_WiFiUSBPwrMngt [65ms]
[startup on_idle 63/78] -> cfgmgr cfg_bootWDP
[startup on_idle 63/78] <- cfgmgr cfg_bootWDP [0ms]
AI CLI*4351> Wed Dec 31 22:01:07 | INFO | aicli.c | send_msg:89 | timeout and retry #4
[startup on_idle 64/78] -> cfgmgr cfg_bootxmpp
[startup on_idle 64/78] <- cfgmgr cfg_bootxmpp [1ms]
AI CLI*3760> Wed Dec 31 22:01:08 | INFO | aicli.c | send_msg:89 | timeout and retry #5
[startup on_idle 65/78] -> cfgmgr cfg_bootNSLookuUpDiagState
[startup on_idle 65/78] <- cfgmgr cfg_bootNSLookuUpDiagState [15ms]
AI CLI*3812> Wed Dec 31 22:01:08 | INFO | aicli.c | send_msg:89 | timeout and retry #5
[startup on_idle 66/78] -> cfgmgr cfg_bootForMiddleware
mv: can't rename '/configs/udhcpd.leases2.bak': No such file or directory
[startup on_idle 66/78] <- cfgmgr cfg_bootForMiddleware [27ms]
sh: LD_LIBRARY_PATH: not found
29
Starting onboarding!
start monitor_wds_link.sh!
onboarding is started with pid=5038
cmd = wl -i wl0 channels
cmd = wl -i wl0 channels
cmd = wl -i wl1 channels
wl: Unsupported
[ndbus][dbus][5052: 0xb6f0a000][69.261787][wa][mc][ndbusMainLoop:555]Main thread errno address:0xb6f0a4e4
[ndbus][dbus][5052: 0xb69f8450][69.268329][wa][mc][thread_entry:463]Child thread errno address:0xb69f8934
AI Engine/Agent
AI Engine loaded
[startup on_idle 67/78] -> cfgmgr cfg_bootSwmgnt
[startup on_idle 67/78] <- cfgmgr cfg_bootSwmgnt [1ms]
Syncmgr last updated on 20181113
=======================BeaconRegisterDbFile=========================
cat: can't open '/configs/auth_beacon': No such file or directory
========================ALL BEACON LIST========================
auth_status auth_mac wifi_2.4g_mac wifi_5g_mac eth_wan_mac channel_id wifi_2.4g_wds_mac wifi_5g_wds_mac vender OUI model sn swversion hwversion
=======================root beacon=========================
mac = 00:00:00:00:00:00, vender = , OUI = , model = , class = , sn = , swversion = , hwversion = , wifi2gMac = , wifi5gMac = , ethWanMac = , wifi2gWdsMac = , wifi5gWdsMac =
cat: can't open '/configs/root_beacon': No such file or directory
[ndbus][dbus][5093: 0xb6f7cd00][69.829534][wa][syncmgr][ndbusMainLoop:555]Main thread errno address:0xb6f7d1e4
[ndbus][dbus][5093: 0xb5f22450][69.833506][wa][syncmgr][thread_entry:463]Child thread errno address:0xb5f22934
AI CLI*3995> Wed Dec 31 22:01:09 | INFO | aicli.c | send_msg:89 | timeout and retry #5
[startup on_idle 68/78] -> cfgmgr cfg_bootWolan
[startup on_idle 68/78] <- cfgmgr cfg_bootWolan [0ms]
AI CLI*4063> Wed Dec 31 22:01:10 | INFO | aicli.c | send_msg:89 | timeout and retry #5
[startup on_idle 69/78] -> cfgmgr cfg_bootXlink
[startup on_idle 69/78] <- cfgmgr cfg_bootXlink [0ms]
cmd = wl -i wl0 channels
cmd = wl -i wl1 channels
cmd = wl -i wl0 channels
[ndbus][dbus][5088: 0xb6fdb000][70.693725][wa][backgroundscan][ndbusMainLoop:555]Main thread errno address:0xb6fdb4ec
[ndbus][dbus][5088: 0xb4eff450][70.700080][wa][backgroundscan][thread_entry:463]Child thread errno address:0xb4eff93c
wl: Unsupported
[startup on_idle 70/78] -> cfgmgr cfg_bootCarrLock
iptables: No chain/target/match by that name.
iptables v1.4.16.3: Couldn't find target `LOCKCARRIER'
Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
ip6tables: No chain/target/match by that name.
ip6tables v1.4.16.3: Couldn't find target `LOCKCARRIER'
Try `ip6tables -h' or 'ip6tables --help' for more information.
ip6tables: No chain/target/match by that name.
Sorry, rule does not exist.
Sorry, rule does not exist.
AI Engine localsocket fd 5
Sorry, rule does not exist.
[startup on_idle 70/78] <- cfgmgr cfg_bootCarrLock [247ms]
[ndbus][dbus][5082: 0xb6f28000][71.298722][wa][ai-engine][ndbusMainLoop:555]Main thread errno address:0xb6f284d0
[ndbus][dbus][5082: 0xb6acf470][71.302117][wa][ai-engine][thread_entry:463]Child thread errno address:0xb6acf940
[startup on_idle 71/78] -> cfgmgr cfg_bootOtaSwAgent
[startup on_idle 71/78] <- cfgmgr cfg_bootOtaSwAgent [0ms]
[startup on_idle 72/78] -> cfgmgr cfg_bootHostInfo
lhInputParametersCheck, 2.4g ifname[wl0] 5g ifname[wl1]
lanhostd is running, debug level: 2, arp interval: 5, expire: 0 led_mode=0, ipv6:1
[startup on_idle 72/78] <- cfgmgr cfg_bootHostInfo [50ms]
5g wifi MAC address = 00:26:86:00:00:00
Lanhostd init get Uniumd listen port=50090,addr=127.0.0.1
send_value_change_message_to_tr069(action=3,oid=255,size=1432) exit
create netlink socket fail
: Protocol not supported
Failed to open netlink socket
bridge ip: 192.168.1.254/netmask=ffffff, hw_addr: dc:d9:ae:xx:xx:xx
Reading ARP table
[ndbus][dbus][5453: 0xb6fe4210][72.566687][wa][lanhostd][ndbusMainLoop:555]Main thread errno address:0xb6fe46e0
[ndbus][dbus][5453: 0xb69a6470][72.568641][wa][lanhostd][thread_entry:463]Child thread errno address:0xb69a6940
[startup on_idle 73/78] -> cfgmgr cfg_bootUploadLogs
Function stl_LogServerObject() is called
[startup on_idle 73/78] <- cfgmgr cfg_bootUploadLogs [14ms]
AI CLI*4351> Wed Dec 31 22:01:12 | INFO | aicli.c | send_msg:89 | timeout and retry #5
AI CLI*3760> Wed Dec 31 22:01:13 | INFO | aicli.c | send_msg:89 | timeout and retry #6
[startup on_idle 74/78] -> cfgmgr cfg_bootBufferBloatEffectFlag
[startup on_idle 74/78] <- cfgmgr cfg_bootBufferBloatEffectFlag [2ms]
AI CLI*5464> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
AI CLI*3812> Wed Dec 31 22:01:13 | INFO | aicli.c | send_msg:89 | timeout and retry #6
AI CLI*5470> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
AI CLI*5474> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
AI CLI*5478> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
rm: can't remove '/tmp/zero_waiting': No such file or directory
AI CLI*5484> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
AI CLI*5488> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine
[startup on_idle 75/78] -> cfgmgr cfg_bootFwAgent
[startup on_idle 75/78] <- cfgmgr cfg_bootFwAgent [0ms]
Controller
[startup on_idle 76/78] -> cfgmgr cfg_bootSrmf
[startup on_idle 76/78] <- cfgmgr cfg_bootSrmf [0ms]
mac = DC:D9:AE:XX:XX:XX, vender = NOKIA, OUI = 98865D, model = G-140W-H, class = G-140W-H, sn = ALCLXXXXXXXX, swversion = 3FE48077CGCB30, hwversion = 3FE48054BDAA, wifi2gMac = DC:D9:AE:XX:XX:XX, wifi5gMac = DC:D9:AE:XX:XX:XX, ethWanMac = DC:D9:AE:XX:XX:XX, wifi2gWdsMac = 6A:D9:AE:XX:XX:XX, wifi5gWdsMac = 72:D9:AE:XX:XX:XX
mac = DC:D9:AE:XX:XX:XX, vender = NOKIA, OUI = 98865D, model = G-140W-H, class = G-140W-H, sn = ALCLXXXXXXXX, swversion = 3FE48077CGCB30, hwversion = 3FE48054BDAA, wifi2gMac = DC:D9:AE:XX:XX:XX, wifi5gMac = DC:D9:AE:XX:XX:XX, ethWanMac = DC:D9:AE:XX:XX:XX, wifi2gWdsMac = 6A:D9:AE:XX:XX:XX, wifi5gWdsMac = 72:D9:AE:XX:XX:XX
killall: smart_link: no process killed
no EthWan for this board
EthManageItf::getInstance: without switch.
SAL: sal_getPhyState get_Ethode = -1
[ndbus][dbus][5038: 0xb6f59d10][74.724978][wa][onboarding][ndbusMainLoop:555]Main thread errno address:0xb6f5a1f4
[ndbus][dbus][5038: 0xb68bf450][74.731199][wa][onboarding][thread_entry:463]Child thread errno address:0xb68bf934
work mode = 3
optopt +
smart link init start
cmd = wl -i wl0 channels
cmd = wl -i wl0 channels
cmd = wl -i wl1 channels
2.4G interface: wl0
5G interface: wl1
wl driver fd = 4
wl_driver_init done
smart link msg init start
smart link msg init done
zero touch init start
uniumd listen port=50090 listen addr=127.0.0.1OUI:[88:B3:62]
oui = 88:B3:62
hex oui = 88:b3:62
zt_get_group_id
sl_get_parameter_value: get parameter value: InternetGatewayDevice.X_ALU-COM_BeaconInfo.GroupID
sl_get_parameter_value: get parameter value ok : fbdf5d17
cmd = ritool dump|grep "G984Serial"|awk '{sub(/G984Serial:/,"",$2);print $2}'
cmd = ritool dump|grep "OperatorID"|awk '{sub(/OperatorID:/,"",$2);print $2}'
total support sn number: 0
zero touch init done
[startup on_idle 77/78] -> cfgmgr cfg_bootSpeedTest
[startup on_idle 77/78] <- cfgmgr cfg_bootSpeedTest [0ms]
[ndbus][dbus][5501: 0xb6f26c60][74.884610][wa][smart_link][ndbusMainLoop:555]Main thread errno address:0xb6f27130
[ndbus][dbus][5501: 0xb6791450][74.885984][wa][smart_link][thread_entry:463]Child thread errno address:0xb6791920
AI CLI*3995> Wed Dec 31 22:01:14 | INFO | aicli.c | send_msg:89 | timeout and retry #6
AI CLI*4063> Wed Dec 31 22:01:15 | INFO | aicli.c | send_msg:89 | timeout and retry #6
AI CLI*4063> Wed Dec 31 22:01:15 | INFO | aicli.c | send_msg:112 | acsenable
sh: missing ]
[ndbus][dbus][5081: 0xb6f8f8d0][80.625858][wa][ai-agent][ndbusMainLoop:555]Main thread errno address:0xb6f8fda0
[ndbus][dbus][5081: 0xb6be6470][80.630539][wa][ai-agent][thread_entry:463]Child thread errno address:0xb6be6940
wl: Unsupported
wl: Unsupported
Tunnel Manager started..!
pid = 6661
pid = 0
ERR hal_hgu_qos_init:Entering Function
ERR: bdmf_configure#1530: ip_class: status:Error in parameters. config:l4_filter[gre]={action=host,protocol=0x2f}
Object configuration failed: Error in parameters
MON: Bdmf/Configure> failed with error code Error in parameters(-1)
killall: dhcpsnoop: no process killed
Wifi Info query received by cs manager...!!
INFO: clean boot fail counter done
wl: Unsupported
In uniumd.init, WORK_MODE=RGW, WORK_ROLE=Controller
probe response blocking feature was disabled, using hw probe response !
enet_stop:L667 eth0: stopped
enet_stop:L667 eth1: stopped
enet_stop:L667 eth2: stopped
enet_stop:L667 eth3: stopped
[FC_FLUSH]br_setport fcache_flush_by_if eth0.0
[FC_FLUSH]br_setport fcache_flush_by_if eth2.0
[FC_FLUSH]br_setport fcache_flush_by_if eth3.0
chmod: /tmp/.meshGwInfo.txt: No such file or directory
enet_open:L634 eth0: opened
enet_open:L634 eth1: opened
enet_open:L634 eth2: opened
[ndbus][dbus][4991: 0xb61fb000][98.646554][fa][ddm][ndbusTransmit:104]an error occurred on (0x17c1278) when nokia.swmgnt:getAllBeenet_open:L634 eth3: opened
acons, ms=5000 : The name nokia.swmgnt was not provided by any .service files
Root Node IP[192.168.1.254]
chmod: /tmp/.meshinfo: No such file or directory
DDM_NAL
DDM INIT1
DDM_INIT
Establishing handler for signal 34
json_object_from_file: error opening file /flash/device_threshold.json: No such file or directory
DDM_DBUS
DDM_QUEUE
DDM_THREADS
meshctl -> meshcomm binary startedmeshcomm arg count : 9
Writing in meshcomm config
MODE=R
INTF=br0
IP_ADDR=192.168.1.254
PORT=10025
Written in meshcomm config
meshctl_startMeshComm 370
meshctl_startMeshComm 372
meshctl_startMeshComm 374
meshctl_startMeshComm 376
meshctl_startMeshComm 378
meshcomm started
[ndbus][dbus][4991: 0xb61cd440][99.197174][wa][ddm][ndbusMainLoop:555]Main thread errno address:0xb61cd918
[ndbus][dbus][4991: 0xb0bff440][99.198644][wa][ddm][thread_entry:463]Child thread errno address:0xb0bff918
starting fp process..! [copyrange = 1024, nf queue id = 1, http = 1, upnp = 1, mdns = 1]
meshctl -> fp binary started
sh: /sbin/wdp: not found
meshctl -> wdp binary started
meshctl LocalAnalyticsEnable is on!
[ndbus][dbus][6919: 0xb650f450][102.645156][wa][lae][ndbusMainLoop:555]Main thread errno address:0xb650f928
[ndbus][dbus][6919: 0xb62ff450][102.646502][wa][lae][thread_entry:463]Child thread errno address:0xb62ff928
mkdir: can't create directory '/tmp/ddm': File exists
Server: Started
Port: 8099
Socket: Initialized
Reuse Port 8099: Enabled
Ip Address: 0.0.0.0
Binding: Success
Listen: Success
Server is now waiting for clients to connect ...
wl: Unsupported
Signal Sent
meshctl -> lae binary startedcsv_sprintf_fmt 79
csv_sprintf_fmt 79
csv_sprintf_fmt 79
mkdir: can't create directory '/tmp/ddm': File exists
Server: Started
Port: 8099
Socket: Initialized
Reuse Port 8099: Enabled
Ip Address: 0.0.0.0
Binding: Success
Listen: Success
Server is now waiting for clients to connect ...
Signal Sent
Signal Sent
set 24g phy_ed_thresh to -60
Signal Sent
wl: Unsupported
lae: [channel_change.c main:884] [ea_channel_change]
App executed !!!
[ndbus][dbus][7154: 0xb6f5d000][119.313439][wa][ea_channel_chan][ndbusMainLoop:555]Main thread errno address:0xb6f5d4d8
[ndbus][dbus][7154: 0xb63c4450][119.319263][wa][ea_channel_chan][thread_entry:463]Child thread errno address:0xb63c4928
csv_sprintf_fmt 79
csv_sprintf_fmt 79
csv_sprintf_fmt 79
csv_sprintf_fmt 79
wl: Unsupported
check certificate files before backup files...
/bcm/script/check_certificate_files.sh: cd: line 37: can't cd to /configs/X509
/bcm/script/check_certificate_files.sh: cd: line 48: can't cd to /logs/configs_key_data_bak/X509
certificate files are damaged in both /configs and /logs, cannot fix!
wl: Unsupported
wl: Unsupported
wl: Unsupported
wl: Unsupported
wl: Unsupported
raise alarm for pon_210_0_1
raise alarm for pon_220_4_1
[12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 1 alarmtype 0 status 0
[12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 1 alarmtype 1 status 1
state == OMCI_ALM_ACTIVE
alarm_bit_mask=0x80
state == OMCI_ALM_INACTIVE
[12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 2 alarmtype 0 status 0
alarm_bit_mask=0x40
[12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 2 alarmtype 1 status 1
state == OMCI_ALM_ACTIVE
alarm_bit_mask=0x20
state == OMCI_ALM_INACTIVE
alarm_bit_mask=0x10
wl: Unsupported
wl: Unsupported
Serial
3,3V, baud 115200
Agradecimentos
Pessoas envolvidas em discussões, dicas ou bate papo em geral. Lista em ordem alfabética.
ont/g-140w-h.1618626547.txt.gz · Última modificação: 2022/11/07 11:31 (edição externa)