O3 Labs

Ferramentas do usuário

Ferramentas do site

Visitou: • Intelbras ONU 110 B (Modelo 1)
ont:intelbras:onu110b-v1

Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

Link para esta página de comparações

Próxima revisão		Revisão anterior
ont:intelbras:onu110b-v1 [2024/10/08 11:54] – criada tripleoxygenont:intelbras:onu110b-v1 [2024/11/01 14:28] (atual) – [Hardware] tripleoxygen
Linha 10: Linha 10:
  
 ===== Hardware ===== ===== Hardware =====
 +
 +{{:ont:intelbras:intelbras-onu110b-v1-front.jpg?direct&400 |}}
 +{{ :ont:intelbras:intelbras-onu110b-v1-back.jpg?direct&400|}}
  
 ---- ----
Linha 40: Linha 43:
  
 ===== Bootlog ===== ===== Bootlog =====
 +
 +++++ Clique aqui para visualizar|
  
 <code> <code>
 +bbbb => 0xbce0... done
 +DD: efuse6: di: a1; sds_num: 1; gphy_num: 0
 +DD: efuse gphy: done
 +DD: efuse sds: [0000fd2b => 00000421] done
 +DD: efuse lxb: break
 +II: OCP 100MHz(400/P1/C1), MEM 325MHz(650/(2*1)), LX 200MHz, SPIF 25MHz(1000/(5*8))
 +II: NOR SPI-F... MXIC/C22017/MMIO16-1/ModeC done
 +
 +DRAM AUTO CALIBRATION
 +AutoK: ZQ Calibration Passed
 +AutoK: MR0: 0x00100b62
 +AutoK: MR1: 0x00110040
 +AutoK: MR2: 0x00120000
 +AutoK: MR3: 0x00130000
 +bit:00, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb8001510) = 0x1e1000
 +bit:01, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001514) = 0x1e1102
 +bit:02, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001518) = 0x1e1102
 +bit:03, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb800151c) = 0x1e1000
 +bit:04, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001520) = 0x1e1102
 +bit:05, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb8001524) = 0x1e1000
 +bit:06, max_w_s(00), max_w_len(23), max_r_s(00), max_r_len(31): (0xb8001528) = 0x1e1000
 +bit:07, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb800152c) = 0x1e1000
 +bit:08, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001530) = 0x1e1102
 +bit:09, max_w_s(00), max_w_len(23), max_r_s(00), max_r_len(31): (0xb8001534) = 0x1e1000
 +bit:10, max_w_s(00), max_w_len(19), max_r_s(00), max_r_len(31): (0xb8001538) = 0x1e1000
 +bit:11, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb800153c) = 0x1e1102
 +bit:12, max_w_s(00), max_w_len(23), max_r_s(00), max_r_len(31): (0xb8001540) = 0x1e1000
 +bit:13, max_w_s(00), max_w_len(19), max_r_s(02), max_r_len(29): (0xb8001544) = 0x1e1102
 +bit:14, max_w_s(00), max_w_len(23), max_r_s(02), max_r_len(29): (0xb8001548) = 0x1e1102
 +bit:15, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb800154c) = 0x1e1000
 +bit:16, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb8001550) = 0x1e1000
 +bit:17, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001554) = 0x1e1102
 +bit:18, max_w_s(00), max_w_len(19), max_r_s(02), max_r_len(29): (0xb8001558) = 0x1e1102
 +bit:19, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb800155c) = 0x1e1000
 +bit:20, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001560) = 0x1e1102
 +bit:21, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb8001564) = 0x1e1000
 +bit:22, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb8001568) = 0x1e1000
 +bit:23, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb800156c) = 0x1e1000
 +bit:24, max_w_s(00), max_w_len(21), max_r_s(04), max_r_len(27): (0xb8001570) = 0x1e1204
 +bit:25, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb8001574) = 0x1e1000
 +bit:26, max_w_s(00), max_w_len(19), max_r_s(02), max_r_len(29): (0xb8001578) = 0x1e1102
 +bit:27, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb800157c) = 0x1e1102
 +bit:28, max_w_s(00), max_w_len(21), max_r_s(02), max_r_len(29): (0xb8001580) = 0x1e1102
 +bit:29, max_w_s(00), max_w_len(19), max_r_s(02), max_r_len(29): (0xb8001584) = 0x1e1102
 +bit:30, max_w_s(00), max_w_len(21), max_r_s(04), max_r_len(27): (0xb8001588) = 0x1e1204
 +bit:31, max_w_s(00), max_w_len(21), max_r_s(00), max_r_len(31): (0xb800158c) = 0x1e1000
 +AutoK: dram auto calibrtaion is done
 +
 +II: MEM_PROBE_OK
 +II: MEM_XLAT_OK
 +II: MEM_TO_REG_OK
 +II: MEM_CNTLR_ZQ_STRICT_OK
 +II: MEM_CAL_OK
 +II: cntlr zq result: 0018e975
 +II: dcr result: 11210000
 +II: Decompressing U-Boot (0x81c00000 <- 0x9fc1b510)... (182 KB <- 70 KB) OK
 +II: Starting U-boot...
 +
 +
 +U-Boot 2011.12.NA (May 06 2019 - 18:16:34)
 +
 +Board: RTL9601B CPU:100MHz LX:200MHz DDR2:325MHz..
 +SPI-F: MXIC/C22017/MMIO16-1/ModeC 1x8 MB (plr_flash_info @ 81c2c7a4)
 +Loading 8192B env. variables from offset 0x40000
 +Loading 8192B env. variables from offset 0x42000
 +Loaded 8192B env. variables from offset 0x40000
 +Net:   LUNA GMAC
 +Warning: eth device name has a space!
 +
 +Hit any key to stop autoboot:  0
 +swcore_init
 +multicast_start Using LUNA GMAC  device
 +mcast upgrade timeout.
 +## Booting kernel from Legacy Image at 9d080000 ...
 +   Image Name:   Linux Kernel Image
 +   Created:      2018-12-20   8:36:50 UTC
 +   Image Type:   MIPS Linux Kernel Image (lzma compressed)
 +   Data Size:    1176584 Bytes = 1.1 MB
 +   Load Address: 80000000
 +   Entry Point:  80000000
 +   Verifying Checksum ... OK
 +   Uncompressing Kernel Image ... OK
 +
 +Starting kernel ...
 +
 +Linux version 2.6.30.9 (dongqifan@software-server) (gcc version 4.4.6 (Realtek RSDK-1.5.6p2) ) #25 Thu Dec 20 16:35:19 CST 2018 [luna SDK V1.9.0]
 +CPU revision is: 0000dc02
 +Determined physical RAM map:
 + memory: 01f00000 @ 00000000 (usable)
 +Zone PFN ranges:
 +  Normal   0x00000000 -> 0x00001f00
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000000 -> 0x00001f00
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 7874
 +Kernel command line: console=ttyS0,115200 mtdparts=rtk_spi_nor_mtd:256K(boot),8K(env),8K(env2),240K(config),1408K(k0)ro,2432K(r0)ro,1408K(k1),2432K(r1),4K@0ro,4K@0ro,4K@0ro,4K@0ro,1408K@512K(linux),2432K@1920K(rootfs) root=31:5
 +root_dev_setup line 180 root: 31:5
 +icache: 64kB/32B, dcache: 32kB/32B, scache: 0kB/0B
 +NR_IRQS:128
 +PID hash table entries: 128 (order: 7, 512 bytes)
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +Memory: 22828k/31744k available (2784k kernel code, 8916k reserved, 825k data, 108k init, 0k highmem)
 +Calibrating delay loop... 99.73 BogoMIPS (lpj=498688)
 +Mount-cache hash table entries: 512
 +IMEM section size = 0x2e78
 +net_namespace: 532 bytes
 +NET: Registered protocol family 16
 +bio: create slab <bio-0> at 0
 +SCSI subsystem initialized
 +Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
 +NET: Registered protocol family 8
 +NET: Registered protocol family 20
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes)
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP: Hash tables configured (established 1024 bind 1024)
 +TCP reno registered
 +NET: Registered protocol family 1
 +=================================
 +luna_capabilities_init
 +=================================
 +=================================
 +luna_wdt_init
 +=================================
 +netlog: listening on port 4660
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +NTFS driver 2.1.29 [Flags: R/W].
 +JFFS2 version 2.2. (NAND) Â 2001-2006 Red Hat, Inc.
 +msgmni has been set to 44
 +alg: No test for stdrng (krng)
 +io scheduler noop registered
 +io scheduler deadline registered
 +io scheduler cfq registered (default)
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
 +serial8250: ttyS0 at MMIO 0x0 (irq = 49) is a 16550A
 +Driver 'sd' needs updating - please use bus_type methods
 +8686 Ethernet driver v0.0.1 (Feb 17, 2012)[Dual Band Disable]
 +TX[256,64,64,64,64] , RX[256,256,256,64,64,128]
 +eth0 (): not using net_device_ops yet
 +eth0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
 +eth0.2 (): not using net_device_ops yet
 +eth0.2: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
 +nas0 (): not using net_device_ops yet
 +nas0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
 +pon0 (): not using net_device_ops yet
 +pon0: RTL-8686 at 0xb8012000, 00:00:00:01:00:02, IRQ 26
 +RTL8686 GMAC Probing..
 +first entry: 0, portmask 127, rx: 802b1a18
 +Init RTK Driver Module....OK
 +Init RTK Core Dev Module....OK
 +
 + rtdrv_init !!! for netfilter
 +pkt_redirect_init complete
 +interrupt broadcaster init ok!
 +u32 classifier
 +nf_conntrack version 0.5.0 (496 buckets, 1984 max)
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +TCP cubic registered
 +NET: Registered protocol family 17
 +Bridge firewalling registered
 +Ebtables v2.0 registered
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 +All bugs added by David S. Miller <davem@redhat.com>
 +Realtek GPIO Driver for Flash Reload Default
 +===============================================================================
 +init_luna_nor_spi_map: flash map at 0xbd000000
 +luna spi probe...
 +luna SPI FLASH G2 driver version 1.00-II: NOR SPI-F... Generic 3B NOR SPI-F detected... done
 +master->name rtk_spi_nor_mtd
 +cmd: cmdlinepart
 +14 cmdlinepart partitions found on MTD device rtk_spi_nor_mtd
 +add luna nor spi partition
 +MTD partitions obtained from kernel command line
 +Creating 14 MTD partitions on "rtk_spi_nor_mtd":
 +0x000000000000-0x000000040000 : "boot"
 +0x000000040000-0x000000042000 : "env"
 +0x000000042000-0x000000044000 : "env2"
 +0x000000044000-0x000000080000 : "config"
 +0x000000080000-0x0000001e0000 : "k0"
 +0x0000001e0000-0x000000440000 : "r0"
 +0x000000440000-0x0000005a0000 : "k1"
 +0x0000005a0000-0x000000800000 : "r1"
 +0x000000000000-0x000000001000 : "Partition_008"
 +0x000000000000-0x000000001000 : "Partition_009"
 +0x000000000000-0x000000001000 : "Partition_010"
 +0x000000000000-0x000000001000 : "Partition_011"
 +0x000000080000-0x0000001e0000 : "linux"
 +0x0000001e0000-0x000000440000 : "rootfs"
 +===============================================================================
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
 +Freeing unused kernel memory: 108k freed
 +init started: BusyBox v1.12.4 (2018-12-20 16:35:22 CST)
 +starting pid 149, tty '': '/etc/init.d/rcS'
 +=== Start to run rc0 / rc63 ===
 +----- do_rc [/etc/init.d/rc2] -----
 +Mounting /dev/mtdblock3 onto /var/config as the configuration data storage
 +----- do_rc [/etc/init.d/rc10] -----
 +----- do_rc [/etc/init.d/rc18] -----
 +no need to do reset to default
 +----- do_rc [/etc/init.d/rc20] -----
 +------ [-b]Bootup_config ------
 +Wait for configd initialize 'MsgQ' and 'Shm'...
 +Wait for configd initialize 'MsgQ' and 'Shm'...
 +set_msgqueue_max_size:180> set msgqidds.msg_qbytes=20600 OK
 +set_msgqueue_max_size:180> set msgqidds.msg_qbytes=20600 OK
 +Fetch mib data (type 8) from program code.
 +Fetch mib data (type 2) from program code.
 +Pre-fetch mib data from program default done.
 +Checking input file [/var/config/lastgood_hs.xml].
 +[OK] Valid config file!
 +
 +***** config_parser(): dfname=[/etc/config_default_hs.xml](0) loaded *****
 +
 +***** config_parser(): fname=[/var/config/lastgood_hs.xml](0) loaded *****
 +
 +[xml_INFO]: Load HS configuration success.
 +Checking input file [/var/config/lastgood.xml].
 +[OK] Valid config file!
 +
 +***** config_parser(): dfname=[/etc/config_default.xml](0) loaded *****
 +
 +***** config_parser(): fname=[/var/config/lastgood.xml](0) loaded *****
 +
 +[xml_INFO]: Load CS configuration success.
 +----- do_rc [/etc/init.d/rc21] -----
 +omci platform attached!
 +register_gpon_evt_state: register gpon event state Successfully !
 +----- do_rc [/etc/init.d/rc22] -----
 +priority: 0, portmask 127, rx: 802b1a18
 +insert here, priority: 7, portmask 255, rx: c00ab34c
 +running GPON mode ...
 +priority: 7, portmask 255, rx: c00ab34c
 +priority: 0, portmask 127, rx: 802b1a18
 +insert here, priority: 0, portmask 1, rx: c00b7288
 +RLDP: TX thread is created!!!
 +
 +RLDP: rldp_detect init ok!
 +RLDP: Recovery thread is created!!!
 +----- do_rc [/etc/init.d/rc32] -----
 +----- do_rc [/etc/init.d/rc34] -----
 +MIB chain descriptors checking (total 8) ok !
 +----- do_rc [/etc/init.d/rc35] -----
 +starting pid 396, tty '/dev/ttyS0': '/bin/login -p'
 +starting pid 397, tty '': '/bin/inetd'
 +xml_mib_update():...
 +login: xml_mib_update():...
 +  TRC_PG(main:1873): delete l2 table entry for intelbras arp issue
 +------ [-u cs]Update cs setting ------
 +------ [-u hs]Update hs setting ------
 +onucomm send ponmode info to peer
 +[xml_INFO]: Update cs configuration success.
 +[xml_INFO]: Update hs configuration success.
 +igmpd is running:  sys_max_port_num =3 .....
 +listening
 +l2-table set limit-learning port all count 0
 +[ERR] Warning, unknown dir name: OMCI_WAN_QOS_QUEUE_NUM
 +<fMgmtInit:420> is the so is not a regular file.
 +<fMgmtInit:420> is the so is not a regular file.
 +<fMgmtInit:420> is the so is not a regular file.
 +Module libigmpipc.so is loaded and inited
 +stat failed: /lib/features/internal/bdp_00000002.so
 +Module /lib/features/internal/bdp_00000008.so is inited
 +Module /lib/features/internal/bdp_00000080.so is inited
 +####################### voice_rtk_init_voip_cfg() #######################
 +voip flash get VOICE_OP_GET_SHM failed.
 +port 1 assign to pon0
 +pon0 -> 0x2
 +re8670_open 3136
 +omci_wrapper_msgHandler: devMode 0,receiveState 1,logLevel 0,sn 544DBB
 +RTK.0> command:iphost's mac 00e04c867001
 +iphost's mac 00 E0 4C 86 70 0A
 +iphost's mac 00 E0 4C 86 70 0A
 +iphost's mac 00e04c867001
 +iphost's mac 00 E0 4C 86 70 0A
 +iphost's mac 00 E0 4C 86 70 0A
 +iphost's mac 00e04c867001
 +iphost's mac 00 E0 4C 86 70 0A
 +iphost's mac 00 E0 4C 86 70 0A
 +l2-table clear l2-table
 +RTK.0> command:   CMD: /bin/ifconfig eth0 hw ether 00e04c867001
 +priority: 0, portmask 1, rx: c00b7288
 +insert here, priority: 4, portmask 2, rx: 801dbb0c
 +   CMD: /bin/brctl addbr br0
 +   CMD: /bin/ifconfig br0 hw ether 00e04c867001
 +   CMD: /bin/brctl stp br0 off
 +   CMD: /bin/brctl setfd br0 1
 +   CMD: /bin/brctl setageing br0 7200
 +   CMD: /bin/brctl addif br0 eth0
 +device eth0 entered promiscuous mode
 +sh: can't create /proc/sys/net/ipv6/conf/br0/dad_transmits: nonexistent directory
 +   CMD: /bin/ifconfig br0 192.168.1.254 netmask 255.255.255.0 mtu 1500
 +   CMD: /bin/boa
 +   CMD: /bin/ifconfig eth0 up
 +br0: port 1(eth0) entering learning state
 +drivers/net/rtl86900/sdk/src/rtk/pon_led.c:1118 led sw blink init complete!
 +rtk_pon_led_SpecType_set 0
 +   CMD: /bin/ifconfig nas0 up
 +TRACE: /bin/ethctl addsmux bridge nas0 nas0_0 napt brpppoe
 +nas0_0 (): not using net_device_ops yet
 +sh: can't create /proc/sys/net/ipv6/conf/nas0_0/use_tempaddr: nonexistent directory
 +   CMD: /bin/ifconfig nas0_0 hw ether 00e04c867004
 +   CMD: /bin/ifconfig nas0_0 txqueuelen 10
 +   CMD: /bin/ifconfig nas0_0 up
 +1483 bridged
 +   CMD: /bin/brctl addif br0 nas0_0
 +device nas0_0 entered promiscuous mode
 +br0: port 2(nas0_0) entering learning state
 +   CMD: /bin/iptables -P INPUT ACCEPT
 +flow_id=128
 +br0: port 1(eth0) entering forwarding state
 +   CMD: /bin/iptables -P FORWARD ACCEPT
 +   CMD: /bin/iptables -A FORWARD -p tcp -o ppp+ --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
 +   CMD: /bin/iptables -A FORWARD -p tcp -i ppp+ --tcp-flags SYN,RST SYN -m tcpmss --mss 1452:1536 -j TCPMSS --set-mss 1452
 +   CMD: /bin/iptables -A INPUT -p udp --dport 520 -j ACCEPT
 +   CMD: /bin/iptables -A INPUT ! -i br0 -d 239.255.255.250 -j DROP
 +   CMD: /bin/iptables -A INPUT -d 224.0.0.0/4 -j ACCEPT
 +   CMD: /bin/ebtables -N br_wan
 +br0: port 2(nas0_0) entering forwarding state
 +size of linux : 1441792
 +size of linux : 3932160
 +init_global_parm834::size of g_max_upload_size : 3932160
 +   CMD: /bin/ebtables -P br_wan RETURN
 +   CMD: /bin/ebtables -N br_wan_out
 +   CMD: /bin/ebtables -P br_wan_out RETURN
 +   CMD: /bin/ebtables -A br_wan -i nas0_0 -j DROP
 +   CMD: /bin/ebtables -A br_wan_out -o nas0_0 -j DROP
 +   CMD: /bin/ebtables -A INPUT -j br_wan
 +   CMD: /bin/ebtables -A OUTPUT -j br_wan_out
 +   CMD: /bin/iptables -N dhcp_port_filter
 +   CMD: /bin/iptables -A INPUT -j dhcp_port_filter
 +*****Enable ftp ALG function!*****
 +*****Enable h323 ALG function!*****
 +*****Enable sip ALG function!*****
 +*****Enable pptp ALG function!*****
 +   CMD: /bin/ifconfig eth0 up
 +sh: can't create /proc/sys/net/ipv6/conf/br0/dad_transmits: nonexistent directory
 +sh: can't create /proc/br_igmpsnoop: nonexistent directory
 +IGMP Snooping: enabled
 +   CMD: /bin/iptables -t mangle -D PREROUTING -i br0 -j lan_mark
 +iptables v1.2.7a: Couldn't find target `lan_mark'
 +
 +Try `iptables -h' or 'iptables --help' for more information.
 +   CMD: /bin/iptables -t mangle -N lan_mark
 +   CMD: /bin/iptables -t mangle -F lan_mark
 +   CMD: /bin/iptables -t mangle -A PREROUTING -i br0 -j lan_mark
 +   CMD: /bin/ebtables -D FORWARD -j portmapping
 +Illegal target name 'portmapping'.
 +   CMD: /bin/ebtables -N portmapping
 +   CMD: /bin/ebtables -A FORWARD -j portmapping
 +   CMD: /bin/ip rule del fwmark 0x00008000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00010000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00018000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00020000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00028000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00030000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00038000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00040000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00048000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00050000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00058000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00060000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00068000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del fwmark 0x00070000/0x000f8080
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ip rule del prohibit
 +RTNETLINK answers: No such file or directory
 +   CMD: /bin/ebtables -A portmapping -i eth+ -o eth+ -j RETURN
 +   CMD: /bin/ebtables -A portmapping -i eth+ -o wlan+ -j RETURN
 +   CMD: /bin/ebtables -A portmapping -i wlan+ -o eth+ -j RETURN
 +   CMD: /bin/ebtables -A portmapping -i wlan+ -o wlan+ -j RETURN
 +   CMD: /bin/ebtables -A portmapping -i eth0+ -j DROP
 +   CMD: /bin/ebtables -A portmapping -i wlan+ -j DROP
 +   CMD: /bin/ebtables -I portmapping 1 -i eth0.2 -o nas0_0 -j RETURN
 +   CMD: /bin/ebtables -I portmapping 1 -i nas0_0 -o eth0.2 -j RETURN
 +   CMD: /bin/ebtables -A portmapping -i nas0_0 -j DROP
 </code> </code>
 +
 +++++
  
 ===== Configurações ===== ===== Configurações =====
Linha 56: Linha 480:
 ==== Stock ==== ==== Stock ====
  
-Versões oficiais e não modificadas para o aparelho. São de propriedade do fabricante - que detém todos os direitos sobre elas - e mantidas aqui apenas em caráter de arquivamento e espelhamento, podendo ser removidas caso solicitado pelos representantes oficiais da empresa.+Versões oficiais e não modificadas para o aparelho podem ser encontrados no site oficial da Intelbras. 
 + 
 +[[https://anon.to/?https://www.intelbras.com/pt-br/conversor-de-sinal-pon-para-sinal-ethernet-onu-110-b|Intelbras]]
  
 ==== Custom ==== ==== Custom ====
  
 <WRAP center round important 80%> <WRAP center round important 80%>
-Todas as versões custom são testadas localmente ao máximo possível, porém seu uso e possíveis implicações são de total responsabilidade do proprietário do aparelho. Não atualize o aparelho sem necessidade; só atualize o aparelho para as versões custom se confirmado que precise das alterações listadas.+Exceto pelas alterações realizadas, as imagens de firmware continuam de propriedade das marcas/fabricantes do aparelho. Não solicite suporte ou assistência para dispositivos utilizando uma imagem //custom//. 
 + 
 +Estas imagens são testadas localmente ao máximo possível porém seu uso e possíveis implicações são de total responsabilidade do proprietário do aparelho.
  
 Os arquivos produzidos pelo O3 Labs são assinados para garantir sua integridade e procedência. Para instruções de como validar as assinaturas, [[about:signing|acesse aqui]]. Os arquivos produzidos pelo O3 Labs são assinados para garantir sua integridade e procedência. Para instruções de como validar as assinaturas, [[about:signing|acesse aqui]].
 </WRAP> </WRAP>
  
 +Versões modificadas com correções e/ou melhorias, baseadas em //releases// oficiais/stock. As versões são cumulativas, ou seja, a mais recente sempre contém também todas as modificações das versões anteriores.
 +
 +=== 1.9-230512 ===
 +
 +  * Baseada no release oficial V1.1-230512
 +  * Adicionado utilitário **setcons**.
 +    * Vários comandos executados via //telnet// no aparelho tem sua saída configurada para o //console// (apontado para a porta serial///UART//), sendo necessário desmontar e usar um adaptador/cabo/conversor serial para vê-las. A ferramenta **setcons** permite redirecionar a saída do //console// para o terminal atual - provavelmente sua sessão //telnet// -, permitindo ver as saídas diretamente. Após conectar-se via //telnet// no aparelho, execute o comando **setcons** para instruções de uso; ou, resumindo:
 +
 +<code bash>
 +setcons -s
 +omcicli get tables
 +omcicli mib get 84
 +setcons -r
 +</code>
 +
 +  * Os comandos entre o **setcons** são apenas exemplos, execute os comandos que desejar. O redirecionamento não é permanente, sendo válido apenas para a mesma sessão. Mesmo que não retorne para a saída padrão depois, tudo retorna ao normal após um reboot ou se desconectar do //telnet//.
  
 +[[https://tripleoxygen.net/files/devices/intelbras/onu110b-v1/firmware/custom/1.9-230512.tar|1.9-230512.tar]]\\ [[https://tripleoxygen.net/files/devices/intelbras/onu110b-v1/firmware/custom/1.9-230512.tar.minisig|1.9-230512.tar.minisig]]
 ===== Agradecimentos ===== ===== Agradecimentos =====
  
ont/intelbras/onu110b-v1.1728399290.txt.gz · Última modificação: por tripleoxygen