Ferramentas do usuário

Ferramentas do site


phone:f1000

Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

Link para esta página de comparações

Ambos lados da revisão anterior Revisão anterior
Próxima revisão
Revisão anterior
phone:f1000 [2016/10/21 22:38]
facsi [Vonage Unlock]
phone:f1000 [2018/02/12 01:31] (atual)
facsi [Provisioning file]
Linha 1: Linha 1:
 ======UTStarcom F1000 / F1000G SIP Phone====== ======UTStarcom F1000 / F1000G SIP Phone======
-{{description>The F1000 is a SIP protocol wifi phone manufactured by UTStarcom in 2005. +=====Description=====
-It supports Wireless B on F1000 and wireless B/G on F1000G.}}+
  
 +The F1000 is a SIP protocol wifi phone manufactured by UTStarcom in 2005.
 +It supports Wireless B on F1000 and wireless B/G on F1000G.
 +
 +=====Agere T8307 Data Sheet=====
 +Processor
 +https://www.tripleoxygen.net/wiki/_media/phone/t8307_v0.2_datasheet.pdf
 +
 +LCD
 +https://www.tripleoxygen.net/wiki/_media/phone/gp-lcd-spec_kgm082b0_.pdf
  
 =====Serial Interface===== =====Serial Interface=====
Linha 10: Linha 18:
  
 It is possible to access it by two means. It is possible to access it by two means.
-====One==== 
-Open the device (which may crack the housing since it is difficult to open) 
  
-Check the board for TX, RX and GND test points.+==== Recommended way ====
  
-====Two==== 
 The USB port at the bottom isn't a normal USB port. Its pinout configuration is: The USB port at the bottom isn't a normal USB port. Its pinout configuration is:
  
Linha 26: Linha 31:
 Note that it uses the additional unused 4th pin on the USB cable. Note that it uses the additional unused 4th pin on the USB cable.
  
 +==== Second way (not recommended) ====
  
 +Open the device (which may crack the housing since it is difficult to open). Check the board for TX, RX and GND test points.
  
  
 =====Firmware===== =====Firmware=====
 ====Vonage Unlock==== ====Vonage Unlock====
-<nowiki>+
 Previously, to do Vonage's unlock people were using the ATE menu to do a full reset. But this menu is not available in many devices. What we need to do is find the actual vonage's admin password to do a factory reset via web browser menu. And this is quite simple. You just need to open your device and hook it to a serial ttl cable. 115200bps speed with default serial settings. Previously, to do Vonage's unlock people were using the ATE menu to do a full reset. But this menu is not available in many devices. What we need to do is find the actual vonage's admin password to do a factory reset via web browser menu. And this is quite simple. You just need to open your device and hook it to a serial ttl cable. 115200bps speed with default serial settings.
  
Linha 62: Linha 69:
 </code> </code>
 Take a closer look on this 2 lines: Take a closer look on this 2 lines:
 +
 httpPwdConfAdd OK YWRtaW46ODRKaTIzZGphVw== httpPwdConfAdd OK YWRtaW46ODRKaTIzZGphVw==
 +
 httpPwdConfAdd OK dXNlcjo4ODg4ODg= httpPwdConfAdd OK dXNlcjo4ODg4ODg=
  
Linha 73: Linha 82:
 You can change the admin password to anything you want by accessing the webpage. You can change the admin password to anything you want by accessing the webpage.
  
-Now follow meisted_sd tutorial and after flashing a 4.50 version, do a factory reset via web menu using admin account. (»Unlocking the UTStarCom F1000)+Now follow meisted_sd tutorial and after flashing a 4.50 version, do a factory reset via web menu using admin account.
  
 PS. I do not recommend the 4.50 version. I prefer flashing 3.80 because you cannot downgrade it or maybe cannot return to vonage's firmware by rewriting the vonages tftp link. PS. I do not recommend the 4.50 version. I prefer flashing 3.80 because you cannot downgrade it or maybe cannot return to vonage's firmware by rewriting the vonages tftp link.
  
-</nowiki>+ 
 +===Meisted_sd flashing=== 
 + 
 +Unlocking the UTStarCom F1000 
 +This unlocking guide was made in a large part 
 +from the unlocking guide 'rkworth' posted here: 
 +»www.vonage-forum.com/fto ··· 464.html 
 +I've added a few comments, which are [in brackets] 
 +and then taken the extra step to totally remove 
 +vonage from the phone. Here is his guide, and then 
 +mine follows at the end. 
 + 
 +------------------------- 
 + 
 + 
 +Password for firmware upgrade - utvonpw 
 + 
 +then- 
 + 
 +So I've managed to unlock the Vonage UT starcom F1000 
 +wifi phone from Vonage. I think it's a first because 
 +there's no other info on how to do this anywhere on the web. 
 + 
 +You'll need a Windows pc for this... 
 + 
 +The first thing to do is download the firmware from here: 
 + 
 +File name is F1000_V3.80st.exe 
 + 
 +just google for f1000 firmware. 
 + 
 +Run this self extracting archive - it's German but no need 
 +to worry - just accept the defaults. 
 +It should unpack 4 files. 
 + 
 +Next make sure your Vonage wifi phone is connected and registered 
 +i.e. you can make a call. [Here, the phone never actually has to 
 +connect to the internet. The password "utvonpw" is factory set 
 +into the phone. You just need it connected on your wireless] 
 + 
 +Scroll through the menus on your phone and choose Wi-Fi 
 +Settings / Network Parameters / Network Info. 
 + 
 +Take note of the IP address (you may not need this but it's 
 +handy to have). Mine is 192.168.1.14. 
 + 
 +Exit out of the Network Info menu and go to the Misc menu 
 + 
 +Select Local TFTP Update. 
 +At the Code prompt enter utvonpw 
 +You'll see a message that says TFTP is a long process.. 
 + 
 +Select Update 
 +The Screen will say Connecting... 
 + 
 +Back to Windows PC and launch the fwupgrade.exe application 
 + 
 +After a split second you should see a phone list that shows the 
 +IP address we had earlier. 
 + 
 +Click Update 
 + 
 +You'll get a warning not to turn off either the Computer, Phone 
 +or Access Point...don't turn them off! 
 + 
 +Mine took about 45 seconds to push the firmware. 
 + 
 +The screen on the phone will read Processing... 
 + 
 +then Decompressing... 
 + 
 +Windows will say that the task was complete...you can close the 
 +updater by clicking Cancel 
 + 
 +Phone is still Decompressing 3 minutes later... 
 + 
 +Then it will switch off. 
 + 
 +***DO NOT TURN IT BACK ON**** or your work will be undone by Vonage! 
 + 
 +-------THIS STEP IS REALLY IMPORTANT------- 
 + 
 +Disconnect your broadband. [You never actually had to have it connected] 
 + 
 +Don't power it off, just disconnect either the phone cable if DSL or 
 +the Coax if on cable. It's important that your wireless network stays up. 
 + 
 +Check that you can no longer browse the internet on your windows pc. 
 + 
 +Turn the F1000 on and it will connect to your wireless network. 
 + 
 +It will try and register via your network but of course you are 
 +disconnected so it can't - this is good! 
 + 
 +Go to the Misc menu on the phone and select remote TFTP server - it 
 +should have a Vonage server address in here...change it to a single 
 +letter "a" (Or any other setting to remove the vonage URL) 
 +[This step isn't really needed if you keep the unit off a 
 +wireless connection and complete my steps at the end of 
 +this part. I've also been told this doesn't always work 
 +to keep the unit from getting provisioned again if it 
 +gets a wireless connection.] 
 + 
 +Turn the phone off 
 + 
 +Reconnect your broadband and ensure you CAN browse to a 
 +webpage or two. 
 + 
 +Turn phone on and it will connect to your wireless network but 
 +it will never Register as it can't find Vonage servers! 
 + 
 +Usng a web browser open the IP address that we remember from earlier. 
 +(This actually connects you to the phones internal web server) 
 +Login as user with password 888888 (six 8's) 
 + 
 +Click User Menu on the left and go immediately to SIP & RTP Config 
 + 
 =====Provisioning file===== =====Provisioning file=====
 This device is capable of automatic provisioning of its settings via either TFTP or HTTP. This device is capable of automatic provisioning of its settings via either TFTP or HTTP.
Linha 210: Linha 336:
 #Manually config SIP timer=T1T24000T45000TimerB32000TimerFTimerHTimerDTimerJ #Manually config SIP timer=T1T24000T45000TimerB32000TimerFTimerHTimerDTimerJ
 </code>  </code> 
 +
 +========
 +This software can create provisioning files for F1000
 +https://www.tripleoxygen.net/wiki/_media/phone/provisioning_1_1_42_x86.zip
 +From: https://sourceforge.net/projects/provisioning/
  
  
Linha 215: Linha 346:
  
 [[http://web.quick.cz/lake/f1000_faq.htm|UTStarcom F1000 FAQ]] [[http://web.quick.cz/lake/f1000_faq.htm|UTStarcom F1000 FAQ]]
 +[[https://www.dslreports.com/forum/r31016698-Definitive-Unlock-for-Vonage-F-1000-UTstarcom|DSL Reports Post]]
 +
 +==== Acknowledgments ====
 +
 +People involved in discussions, tips, or general chat. List in alphabetical order.
 +
 +facsi, Steve Hiddenvision, Tripleoxygen
 +
    
phone/f1000.1477089486.txt.gz · Última modificação: 2016/10/21 22:38 por facsi